On 16/09/2020 17:11, Michael Schumacher wrote:
hi,
I am planning to replace my old CentOS 6 mail server soon. Most details
are quite obvious and do not need to be changed, but the old system
was running on spinning discs and this is certainly not the best
option for todays mail servers.
With spinning discs, HW-RAID6 was the way to go to increase reliability
and speed.
Today, I get the feeling, that traditional RAID is not the best
option for SSDs. I am reading that all RAID members in SSD-arrays age
synchronously so that the risk of a massive failure of more than one
disk is more likely than with HDDs. There are many other concerns like
excessive write load compared to non-raid systems, etc.
Is there any common sense what disk layout should be used these days?
I have been looking for some kind of master-slave system, where the
(one or many) SSD is taking all writes and reads, but the slave HDD
runs in parallel as a backup system like in a RAID1 system. Is there
any such system?
Any thoughts?
You can achieve this with a hybrid RAID1 by mixing SSDs and HDDs, and
marking the HDD members as --write-mostly, meaning most of the reads
will come from the faster SSDs retaining much of the speed advantage,
but you have the redundancy of both SSDs and HDDs in the array.
Read performance is not far off native write performance of the SSD, and
writes mostly cached / happen in the background so are not so noticeable
on a mail server anyway.
I kind of stumbled across this setup by accident when I added an NVMe
SSD to an existing RIAD1 array consisting of 2 HDDs.
# cat /proc/mdstat
Personalities : [raid1]
md127 : active raid1 sda1[2](W) sdb1[4](W) nvme0n1p1[3]
485495616 blocks super 1.0 [3/3] [UUU]
bitmap: 3/4 pages [12KB], 65536KB chunk
See how we have 3 devices in the above RAID1 array, 2 x HDDs, marked
with a (W) indicating they are in --write-mostly mode, and one SSD
(MVMe) device. I just went for 3 devices in the array as it started life
as a 2 x HDD array and I added the third SSD device, but you can mix and
match to suit your needs.
See the following article which may be helpful or search 'mdadm
write-mostly' for more info.
https://www.tansi.org/hybrid/
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
