Re: Simple scan in CentOS 7

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On 06/16/2020 01:08 PM, H wrote:
> On 06/15/2020 08:58 PM, Fred Smith wrote:
>> On Mon, Jun 15, 2020 at 04:28:17PM -0400, H wrote:
>>> I just installed C7 on a new computer and despite Simple Scan being installed as part of C7, I have not been able to get it to recognize my Canon scanner connected to a USB port. I did have it running on another computer with C7 so there should not be any inherent issues.
>>>
>>> On a lark I installed gscan2pdf and sane-backends-drivers-scanners and sane-find-scanner found it:
>>>
>>> found USB scanner (vendor=0x04a9 [Canon], product=0x1908 [CanoScan]) at libusb:001:010
>>>
>>> I perused my notes for the old computer but did not see I installed any additional software to get it going but I might be wrong.
>>>
>>> What have I missed?
>>>
>> On my C7 box, simple-scan requires libsane. try: ldd simple-scan |grep -i sane.
>>
>> # ldd /usr/bin/simple-scan | grep -i sane
>> 	libsane.so.1 => /lib64/libsane.so.1 (0x00007f3668291000)
>>
>>
>> ldd doesn't show any other sane dependencies, but I'd sorta think
>> that simple-scan would also need sane-backends as well. Here's all
>> the sane things I have installed, FYI:
>>
>> # ldd /usr/bin/simple-scan | grep -i sane
>> 	libsane.so.1 => /lib64/libsane.so.1 (0x00007f3668291000)
>> [root@fcshome log]# yum list installed | grep -i sane
>> libsane-hpaio.x86_64                  3.15.9-5.el7               @base          
>> sane-backends.x86_64                  1.0.24-12.el7              @base          
>> sane-backends-devel.i686              1.0.24-12.el7              @base          
>> sane-backends-devel.x86_64            1.0.24-12.el7              @base          
>> sane-backends-doc.noarch              1.0.24-12.el7              @base          
>> sane-backends-drivers-cameras.i686    1.0.24-12.el7              @base          
>> sane-backends-drivers-cameras.x86_64  1.0.24-12.el7              @base          
>> sane-backends-drivers-scanners.i686   1.0.24-12.el7              @base          
>> sane-backends-drivers-scanners.x86_64 1.0.24-12.el7              @base          
>> sane-backends-libs.i686               1.0.24-12.el7              @base          
>> sane-backends-libs.x86_64             1.0.24-12.el7              @base          
>> sane-frontends.x86_64                 1.0.14-19.el7              @base          
>> xsane.x86_64                          0.999-9.el7                @base          
>> xsane-common.x86_64                   0.999-9.el7                @base          
>> xsane-gimp.x86_64                     0.999-9.el7                @base
>>
>> also FYI, I'm using a Canon LiDE 210, which works fine for me.
>>
>> Good luck!
>>
>> Fred
>>
> I get:
>
> #ldd /usr/bin/simple-scan | grep -i sane
>     libsane.so.1 => /lib64/libsane.so.1 (0x00007f0d4ab47000)
>
> and
>
> #yum list installed | grep -i sane
> perl-Sane.x86_64                       0.05-8.el7.nux              @nux-dextop 
> sane-backends.x86_64                   1.0.24-12.el7               @base       
> sane-backends-drivers-scanners.x86_64  1.0.24-12.el7               @base       
> sane-backends-libs.x86_64              1.0.24-12.el7               @base       
> sane-frontends.x86_64                  1.0.14-19.el7               @base
>
>
Problem solved, I had forgotten to launch the saned daemon... Scanning now works.

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos




[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]


  Powered by Linux