Hello,
Am Donnerstag, 3. Oktober 2019, 01:41:59 CEST schrieb Akemi Yagi:
> On Wed, Oct 2, 2019 at 4:10 PM Akemi Yagi <amyagi@xxxxxxxxx> wrote:
> > On Wed, Oct 2, 2019 at 3:35 PM Günther J. Niederwimmer <gjn@xxxxxxxxxxx>
wrote:
> > > This Board have 2 Controller!°
> > > 00:1f.2 RAID bus controller: Intel Corporation C600/X79 series chipset
> > > SATA
> > > RAID Controller (rev 06)
> > >
> > > On this controller all drives are found and it is possible to create a
> > > Raid1!
> > >
> > > 07:00.0 Serial Attached SCSI controller: Intel Corporation C602 chipset
> > > 4-Port SATA Storage Control Unit (rev 06)
> > >
> > > But on this Contoller NO drives found?
> >
> > If you provide the device ID pairing [xxxx:yyyy] for the one that is
> > not working, it will become clear. Can you show us the output from:
> >
> > lspci -nn
> >
> > Is it this one?
> >
> > Serial Attached SCSI controller [0107]: Intel Corporation C602 chipset
> > 4-Port SATA Storage Control Unit [8086:1d6b]
> >
> > If so, the above device ID [8086:1d6b] is not supported in RHEL/CentOS
> > 8, unfortunately.
> >
> > Akemi
>
> And if that is indeed your device, that was bad news. But you have
> good news too.
>
> Device [8086:1d6b] is supported by the isci kernel module. ELRepo has
> a DUD for this driver: dd-isci-1.2.0-1.el8.elrepo.iso
>
> Ljubomir provided detailed instructions on how to use ELRepo's DUD
> isos earlier in this thread.
OK, I will test it!
Thanks fort the help and answers,
--
mit freundlichen Grüssen / best regards,
Günther J. Niederwimmer
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
