On Wed, Oct 2, 2019 at 4:10 PM Akemi Yagi <amyagi@xxxxxxxxx> wrote:
>
> On Wed, Oct 2, 2019 at 3:35 PM Günther J. Niederwimmer <gjn@xxxxxxxxxxx> wrote:
> >
>
> > This Board have 2 Controller!°
> > 00:1f.2 RAID bus controller: Intel Corporation C600/X79 series chipset SATA
> > RAID Controller (rev 06)
> >
> > On this controller all drives are found and it is possible to create a Raid1!
> >
> > 07:00.0 Serial Attached SCSI controller: Intel Corporation C602 chipset 4-Port
> > SATA Storage Control Unit (rev 06)
> >
> > But on this Contoller NO drives found?
>
> If you provide the device ID pairing [xxxx:yyyy] for the one that is
> not working, it will become clear. Can you show us the output from:
>
> lspci -nn
>
> Is it this one?
>
> Serial Attached SCSI controller [0107]: Intel Corporation C602 chipset
> 4-Port SATA Storage Control Unit [8086:1d6b]
>
> If so, the above device ID [8086:1d6b] is not supported in RHEL/CentOS
> 8, unfortunately.
>
> Akemi
And if that is indeed your device, that was bad news. But you have
good news too.
Device [8086:1d6b] is supported by the isci kernel module. ELRepo has
a DUD for this driver: dd-isci-1.2.0-1.el8.elrepo.iso
Ljubomir provided detailed instructions on how to use ELRepo's DUD
isos earlier in this thread.
Akemi
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
