>
> >
> > [root@darkness ~]# ls -al /dev/sr*
> > ls: cannot access /dev/sr*: No such file or directory
> > [root@darkness ~]# ls /dev/s*
> > /dev/sda /dev/sda3 /dev/sdb1 /dev/sg0 /dev/stderr
> > /dev/sda1 /dev/sda4 /dev/sdb2 /dev/sg1 /dev/stdin
> > /dev/sda2 /dev/sdb /dev/sdb3 /dev/snapshot /dev/stdout
> > [root@darkness ~]# hwinfo --cdrom
> > [root@darkness ~]#
> >
>
> Presumably it is a SATA CD/DVD - if so you need to go through the
> output of dmesg to see if it is detected on one of the SATA lines -
> possibly grepping for 'ata' should show something. If it's not even
> seeing it on a SATA line, then there is something strange with the
> hardware or bios configuration.
>
windows 10 is listing device as;
PLDS DVD-RW DU8A6SH
google search is showing spec is SATA (the cdrom can also be swapped
out/replaced with a second SATA HDD)
this is what I see in dmesg;
[ 1.835374] libata version 3.00 loaded.
[ 1.879093] ata1: DUMMY
[ 1.879096] ata2: DUMMY
[ 1.879099] ata3: SATA max UDMA/133 abar m524288@0xc5700000 port
0xc5700200 irq 136
[ 1.879102] ata4: SATA max UDMA/133 abar m524288@0xc5700000 port
0xc5700280 irq 137
[ 2.183682] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.183825] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7.183893] ata3.00: qc timeout (cmd 0xec)
[ 7.183908] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 7.183960] ata4.00: qc timeout (cmd 0xa1)
[ 7.183974] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 7.488894] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 7.488931] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 17.488919] ata3.00: qc timeout (cmd 0xec)
[ 17.488934] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 17.488942] ata3: limiting SATA link speed to 3.0 Gbps
[ 17.488964] ata4.00: qc timeout (cmd 0xa1)
[ 17.488979] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 17.793923] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 17.794894] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 47.794008] ata3.00: qc timeout (cmd 0xec)
[ 47.794023] ata3.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 47.794880] ata4.00: qc timeout (cmd 0xa1)
[ 47.794897] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 48.099012] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
[ 48.099884] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
I'm seeing this from dmidecode; (I'll reboot and look over the BIOS
settings)
Last I remember being in the BIOS, I don't recall seeing anything that may
be an issue.
BIOS Information
Vendor: LENOVO
Version: N1DETA4W (2.30 )
Release Date: 05/09/2019
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 16 MB
Characteristics:
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
3.5"/720 kB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 2.30
Firmware Revision: 1.18
Handle 0x000F, DMI type 1, 27 bytes
thanks
~d
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
