Dear Gordon Messmer,
Thank you.
Please teach me one more.
By 'firewall-cmd --list' its answer is following.
external (active)
target: default
icmp-block-inversion: no
interfaces: eth0
sources:
services: dns ftp http https imaps pop3s smtp ssh
ports: 110/tcp 21/tcp 20000/tcp 106/tcp 53/tcp 990/tcp 5432/tcp 8447/tcp
113/tcp 143/tcp 3306/tcp 5224/tcp 22/tcp 465/tcp 995/tcp 25/tcp 10000/tcp
8443/tcp 993/tcp 443/tcp 8880/tcp 587/tcp 20/tcp 53/udp 12768/tcp
protocols:
masquerade: yes
forward-ports:
sourceports:
icmp-blocks:
rich rules:
Now I can use http normally.
And 'ss -nat' shows 80 ports used.
But in avobe firewalld lists, there's http service, but isn't 80/tcp.port.
Must I add 80/tcp.port?
Tadao
2017-07-28 11:29 GMT+09:00 Gordon Messmer <gordon.messmer@xxxxxxxxx>:
> On 07/27/2017 06:36 PM, 望月忠雄 wrote:
>
>> But by ss -nat, IPV4 443 is not listend. How can I fix?
>>
>> # ss -nat | grep LISTEN | grep 443
>> LISTEN 0 128 :::443 :::*
>>
>
>
> By default, Linux processes that listen on an IPv6 port will also listen
> on the IPv4 port (when no specific address is specified):
>
> http://man7.org/linux/man-pages/man7/ipv6.7.html
>
> You could change that behavior by modifying /proc/sys/net/ipv6/bindv6only,
> but your system is working normally now.
>
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> https://lists.centos.org/mailman/listinfo/centos
>
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
