install of audacity kills audio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



# uname -r
3.10.0-514.6.1.el7.x86_64
# cat /etc/centos-release
CentOS Linux release 7.3.1611 (Core)

Prior to the below the sound/audio on my system worked just fine.

Then a yum of install of audacity with dependencies:

...
Downloading packages:
(1/6): vamp-plugin-sdk-2.5-4.el7.x86_64.rpm                | 172 kB   00:03
(2/6): wxGTK-2.8.12-20.el7.x86_64.rpm                      | 2.9 MB   00:00
(3/6): audacity-2.1.1-1.el7.x86_64.rpm                     | 4.3 MB   00:08
(4/6): portaudio-19-16.el7.x86_64.rpm                      |  88 kB   00:09
(5/6): libid3tag-0.15.1b-17.el7.x86_64.rpm                 |  48 kB   00:09
(6/6): wxBase-2.8.12-20.el7.x86_64.rpm                     | 588 kB   00:10
...

Now nothing which is supposed to output is working; e.g., something as simple as "play file.wav" hangs at the start and outputs no sound at all. Two minutes prior to the install the exact same command worked. Same story with other apps using sound.

I "erased" (rpm -e ...) all of the installed packages listed above. That didn''t fix the problem.

My guess is that the install loaded one or more bogus kernel modules, it would be nice if lsmod showed WHEN the modules were loaded, but it doesn't. Is there some way to find this out?

# lspci -vv -s 00:1f.3
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
    Subsystem: Hewlett-Packard Company Device 80ee
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32, Cache Line Size: 64 bytes
    Interrupt: pin A routed to IRQ 130
    Region 0: Memory at 96220000 (64-bit, non-prefetchable) [size=16K]
    Region 4: Memory at 96210000 (64-bit, non-prefetchable) [size=64K]
    Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
        Address: 00000000fee003d8  Data: 0000
    Kernel driver in use: snd_hda_intel
    Kernel modules: snd_hda_intel

# rmmod snd_hda_intel
rmmod: ERROR: Module snd_hda_intel is in use

snd_hda_intel probably isn't the offending module anyway.


I recall having this same problem five or ten years ago with an audacity install, but don't recall what I did to fix it. Anyone here closer to this issue?

Thanks much.

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux