Re: Slow RAID Check/high %iowait during check after updgrade from CentOS 6.5 -> CentOS 7.2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



John R Pierce wrote:
> On 5/25/2016 11:44 AM, Kelly Lesperance wrote:
>> The HBA is an HP H220.
>
> OH.    its a very good idea to verify the driver is at the same revision
> level as the firmware.    not 100% sure how you do this under CentOS, my
> H220 system is running FreeBSD, and is at revision P20, both firmware
> and driver.     HP's firmware, at least what I could find, was a fairly
> old P14 or something, so I had to re-flash mine with 'generic' LSI
> firmware, this isn't exactly a recommended thing to do, but its sure
> working fine for me.

Not sure if dmidecode will tell you, but you might see if you can run
smartctl -i

Also, you could either, on boot, go into the card's firmware interface,
and that'll tell you, somewhere, what the firmware version is. Not sure if
MegaRAID will work with this card - if it does, you really want it..even
though it has an actively user-hostile interface.

      mark

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux