Re: Slow RAID Check/high %iowait during check after updgrade from CentOS 6.5 -> CentOS 7.2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Kelly Lesperance wrote:
> I’ve posted this on the forums at
> https://www.centos.org/forums/viewtopic.php?f=47&t=57926&p=244614#p244614
> - posting to the list in the hopes of getting more eyeballs on it.
>
> We have a cluster of 23 HP DL380p Gen8 hosts running Kafka. Basic specs:
>
> 2x E5-2650
> 128 GB RAM
> 12 x 4 TB 7200 RPM SATA drives connected to an HP H220 HBA
> Dual port 10 GB NIC
>
> The drives are configured as one large RAID-10 volume with mdadm,
> filesystem is XFS. The OS is not installed on the drive - we PXE boot a
> CentOS image we've built with minimal packages installed, and do the OS
> configuration via puppet. Originally, the hosts were running CentOS 6.5,
> with Kafka 0.8.1, without issue. We recently upgraded to CentOS 7.2 and
> Kafka 0.9, and that's when the trouble started.
<SNIP>
One more stupid question: could the configuration of the card for how the
drives are accessed been accidentally changed?

          mark

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos




[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux