Hello,
there is one route missing:
128.0.0.0/1.
config client:
route-nopull
redirect-gateway def1 bypass-dhcp
best regards
Helmut
Viele Grüße
Helmut Drodofsky
Internet XS Service GmbH
Heßbrühlstraße 15
70565 Stuttgart
Geschäftsführung
Dr.-Ing. Roswitha Hahn-Drodofsky
HRB 21091 Stuttgart
USt.ID: DE190582774
Tel. 0711 781941 0
Fax: 0711 781941 79
Mail: info@xxxxxxxxxxxxxx
www.internet-xs.de
Am 06.12.2015 um 20:26 schrieb Axel Glienke:
Hello,
i have a little question.
My system:
ip route:
0.0.0.0/1 via 10.8.0.5 dev tun0
default via 192.168.2.1 dev br0 proto static metric 425
10.8.0.1 via 10.8.0.5 dev tun0
10.8.0.5 dev tun0 proto kernel scope link src 10.8.0.6
88.198.140.127 via 192.168.2.1 dev br0
192.168.2.0/24 dev br0 proto kernel scope link src 192.168.2.101
metric 425
192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1
traceroute gmx.de
traceroute to gmx.de (213.165.65.60), 30 hops max, 60 byte packets
1 Speedport.ip (192.168.2.1) 0.578 ms 0.662 ms 0.859 ms
^C
[root@h1 ~]# traceroute spiegel.de
traceroute to spiegel.de (62.138.116.3), 30 hops max, 60 byte packets
1 10.8.0.1 (10.8.0.1) 35.009 ms 34.982 ms 34.956 ms
Why the routing is different, in first case over br0 in second over
the vpn device?
How can i disable "push default route" from the server-directive on
client-side in OpenVPN?
I want, that only traffic, incoming over tun0 routing back over tun0.
Is this possible with firewalld-cmd?
Thx.
Grüße
Axel
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
https://lists.centos.org/mailman/listinfo/centos
