Craig White <craigwhite@xxxxxxxxxxx> wrote:
> OK - I only have one tape drive but a real problem these
> days backing up. I ***may*** have connected the SCSI
> connector to the 'other' external connector when shifting
> stuff around in the rack.
> # cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 00 Id: 00 Lun: 00
> Vendor: MegaRAID Model: LD 0 RAID5 69G Rev: 4.10
> Type: Direct-Access ANSI SCSI
> revision: 02
> Host: scsi0 Channel: 04 Id: 06 Lun: 00
> Vendor: PE/PV Model: 1x3 SCSI BP Rev: 1.1
> Type: Processor ANSI SCSI
> revision: 02
> Host: scsi0 Channel: 05 Id: 06 Lun: 00
> Vendor: SEAGATE Model: ULTRIUM06242-XXX Rev: 1514
> Type: Sequential-Access ANSI SCSI
> revision: 03
> Host: scsi0 Channel: 05 Id: 06 Lun: 01
> Vendor: SEAGATE Model: ULTRIUM06242-XXX Rev: 1514
> Type: Sequential-Access ANSI SCSI
> revision: 03
> How do I get it 're-parse' the scsi system so it only
> indicates one ULTRIUM tape drive? Me suspects this is
> why I am having backup issues.
2 Options ...
1. If the devices are not in use, merely "rmmod" the SCSI
stack (st, sd, host, mod_scsi/scsi_mod) and then re-probe
(modprobe st).
2. You can rescan the SCSI bus in a variety of ways (even a
few more with kernel 2.6). There are countless scripts
usable for SCSI, FireWire, etc... available via a Google
search ("Linux SCSI rescan").
--
Bryan J. Smith | Sent from Yahoo Mail
mailto:b.j.smith@xxxxxxxx | (please excuse any
http://thebs413.blogspot.com/ | missing headers)
