Quoting Craig White <craigwhite@xxxxxxxxxxx>:
> OK - I only have one tape drive but a real problem these days backing
> up. I ***may*** have connected the SCSI connector to the 'other'
> external connector when shifting stuff around in the rack.
>
> # cat /proc/scsi/scsi
> Attached devices:
> Host: scsi0 Channel: 05 Id: 06 Lun: 00
> Vendor: SEAGATE Model: ULTRIUM06242-XXX Rev: 1514
> Type: Sequential-Access ANSI SCSI revision: 03
> Host: scsi0 Channel: 05 Id: 06 Lun: 01
> Vendor: SEAGATE Model: ULTRIUM06242-XXX Rev: 1514
> Type: Sequential-Access ANSI SCSI revision: 03
>
> How do I get it 're-parse' the scsi system so it only indicates one
> ULTRIUM tape drive? Me suspects this is why I am having backup issues.
Hm, reboot? ;-)
However, it might not help. Some hardware likes to be seen on more than one
LUN. I used to have one ancient 8mm Exabyte tape drive that would report it
has about 8 LUNs. Go figure.
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
