Matt wrote:
> I am setting up a Centos 6.5 box to host some Openvz containers. I
> have a 120gb SSD I am going to use for boot, / and swap. Should allow
> for fast boots. Have a 4TB drive I am going to mount as /backup and
> use to move container backups too etc. The remaining four 3TB drives
> I am putting in a software RAID 10 array and mount as /vz and all the
> containers will go there. It will have by far the most activity.
>
> Does this layout look ok?
>
> RAID Devices
> md0 (/dev/md0) 5722917 /vz ext4
> Hard Drives
> sda (/dev/sda)
> sda1 (/dev/sda1)
> sda1 500 /boot ext4
<snip>
Make it 1G for /boot. I've actually used preupgrade in fedora, when I
brought a couple of workstations from FC17 to FC19, and it *needed* about
300G; I do *not* expect that to go down, and 1G, which we've decided on
and have been using at work for several years, should be ok.
Oh, and we've just defaulted to 2G swap (and my mind SEGV's when I mention
how much RAM some of our servers have....)
mark
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
