On Mon, 2005-10-10 at 15:51 +0200, kadafax wrote:
> I found drivers who seems to be arch independent at
> http://qlogic.com/support/oem_product_detail.asp?p_id=680&oemid=284&oemname=QLA200
>
> but, I've got the same error:
> ---
> # ./qlinstall
>
> #*********************************************************#
> # QLogic HBA Linux Driver Installation #
> # Version: 1.00.00b2pre16 #
> #*********************************************************#
>
> Kernel version: 2.6.9-11.ELsmp
> Distribution: CentOS release 4.1 (Final)
>
> Found QLogic Fibre Channel Adapter in the system
> 1: QLA6312
> Installation will begin for following driver(s)
> 1: qla2xxx version: v8.00.03b
>
> Preparing...
> ##################################################
> error: %pre(qla2xxx-v8.00.03b-1.noarch) scriptlet failed, exit status 255
> error: install: %pre scriptlet failed (2), skipping qla2xxx-v8.00.03b-1
> ---
> Do you know what is this "scriptlet" error?
> thanks
>
> > Johnny Hughes wrote:
> >
> >> If you installed the x86_64 arch ... Yes, it looks like that RPM was
> >> written for an i686 kernel.
> >>
> >> Where did you get the RPM? Do that have a SRPM? Do they have an RPM
> >> for x86_64.
> >>
> >>
> > From the CD shipped with the card (by Dell, it was an all in one:
> > PE-2850 & QLA-200HBA & EMC AX-100). There is no source on the CD nor
> > X86-64 version. I can't find any driver for the QLA-200 on
> > support.qlogic.com, except the windows one... I keep searching.
> >
I can't really tell without the source code.
You might try installing i386 distro ... also, before that you might see
if changing the text in /etc/redhat-release to what it says for the
upstream vendor will make it work.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
Url : http://lists.centos.org/pipermail/centos/attachments/20051010/75a362ec/attachment.bin
