I found drivers who seems to be arch independent at
http://qlogic.com/support/oem_product_detail.asp?p_id=680&oemid=284&oemname=QLA200
but, I've got the same error:
---
# ./qlinstall
#*********************************************************#
# QLogic HBA Linux Driver Installation #
# Version: 1.00.00b2pre16 #
#*********************************************************#
Kernel version: 2.6.9-11.ELsmp
Distribution: CentOS release 4.1 (Final)
Found QLogic Fibre Channel Adapter in the system
1: QLA6312
Installation will begin for following driver(s)
1: qla2xxx version: v8.00.03b
Preparing...
##################################################
error: %pre(qla2xxx-v8.00.03b-1.noarch) scriptlet failed, exit status 255
error: install: %pre scriptlet failed (2), skipping qla2xxx-v8.00.03b-1
---
Do you know what is this "scriptlet" error?
thanks
> Johnny Hughes wrote:
>
>> If you installed the x86_64 arch ... Yes, it looks like that RPM was
>> written for an i686 kernel.
>>
>> Where did you get the RPM? Do that have a SRPM? Do they have an RPM
>> for x86_64.
>>
>>
> From the CD shipped with the card (by Dell, it was an all in one:
> PE-2850 & QLA-200HBA & EMC AX-100). There is no source on the CD nor
> X86-64 version. I can't find any driver for the QLA-200 on
> support.qlogic.com, except the windows one... I keep searching.
>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> CentOS mailing list
>> CentOS@xxxxxxxxxx
>> http://lists.centos.org/mailman/listinfo/centos
>>
>>
>
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
>
