Re: Third-party SATA-RAID cards suggestions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



> -----Original Message-----
> From: centos-bounces@xxxxxxxxxx [mailto:centos-bounces@xxxxxxxxxx] On
> Behalf Of John R Pierce
> Sent: den 5 december 2013 09:58
> To: centos@xxxxxxxxxx
> Subject: Re:  Third-party SATA-RAID cards suggestions
>
> 10 hard drives should be plugged into a SAS backplane, even if they are
> SATA drives, and driven by a SAS controller, using a 4 channel SAS
> cable.  anything else is ghetto.

It might be considered that, it was a cheap solution. Not necessarily the best 
one.


> you said RAID card, then you talk about JBOD?   which is it.

Primarily RAID.


> the LSI SAS 920x family should work just fine at this.   if it didn't
> you got cabling problems.

Thank you for the hint. The setup worked fine with Windows 2012 R2, which saw 
both card and disks and was able to create a raid0-array for testing.
CentOS 5/6 didn't for some reason.


> at centos install time, you don't create a single big software raid out
> of anything, you create mirrors for your OS root and /boot file systems,
> then after the system is running, you create your big raid 10 or
> whatever as your data volume, make that LVM, put /home and /var on it if
> you want, whatever.

I apologize for any confusion. For linux-servers I usually install CentOS on a 
separate system disk, with user-data on another separate disk or as in this 
case on the other ten drives which are to form a single raid-array.

--
//Sorin
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux