Hi, I have plug in this USB network device:
> Bus 001 Device 002: ID 2001:1a02 D-Link Corp.
> T: Bus=01 Lev=01 Prnt=01 Port=04 Cnt=01 Dev#= 2 Spd=480 MxCh= 0
> D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs= 1
> P: Vendor=2001 ProdID=1a02 Rev= 0.01
> S: Manufacturer=D-Link
> S: Product=DUB-E100
> S: SerialNumber=E5ECEB
> C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=200mA
> I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=(none)
> E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=128ms
> E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
This is the log information:
> Oct 24 10:10:56 s-virt kernel: usb 1-5: new high speed USB device number 2 using ehci_hcd
> Oct 24 10:10:57 s-virt kernel: usb 1-5: New USB device found, idVendor=2001, idProduct=1a02
> Oct 24 10:10:57 s-virt kernel: usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> Oct 24 10:10:57 s-virt kernel: usb 1-5: Product: DUB-E100
> Oct 24 10:10:57 s-virt kernel: usb 1-5: Manufacturer: D-Link
> Oct 24 10:10:57 s-virt kernel: usb 1-5: SerialNumber: E5ECEB
> Oct 24 10:10:57 s-virt kernel: usb 1-5: configuration #1 chosen from 1 choice
But, if I run 'ip a' I do not see other new network device (ethX).
It's possible resolve this issue and use this USB network device?
Many thanks
--
Dario Lesca - sip:dario@xxxxxxxxxx
(Inviato dal mio Linux Fedora19+Gnome3.8)
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
