On May 30, 2013, at 1:05 PM, m.roth@xxxxxxxxx wrote:
> Norman Schklar wrote:
>> Norm Schklar
>> On Thu, May 30, 2013 at 11:41 AM, <m.roth@xxxxxxxxx> wrote:
>>> Norman Schklar wrote:
>>>> mark wrote
>>>> Norm Schklar
>>>> On Thu, May 30, 2013 at 10:42 AM, <m.roth@xxxxxxxxx> wrote:
>>>>> Norman Schklar wrote:
>>>>>> On Thu, May 30, 2013 at 10:23 AM, <m.roth@xxxxxxxxx> wrote:
>>>>>>> Norman Schklar wrote:
>>>>>>>> Seems I need to disable RAID, but don't find the option in the
>>>>>>>> bios. 4ea 1 terabyte drives in raid 10 is the current setup.
>>> <snip>
>>>>>> Centor 6.4 doesn't find the drives.
>>>>>> I use Ctrl E, to open the raid console but it doesn't have an
>>>>>> option to disable. So each time it boots I get the raid init.
> <snip>
>>>>>> you've created the logical drives, when you reboot, the systems
> *will*
>>>>>> see them as though they were physical drives.
>>>>>
>>>>> Does what I'm saying make sense to you?
>>>> Yes it makes sense. But it came configured for Raid 10 2 ea 2 terabye
>>>> drives. Centos 6.4 doesn't recognize any drive..
>>>
>>> Does the system have other drives than the RAID? You mention it booting
>>> -
>>> you *are* aware that with RAID 10, you'll have something like 1.6TB
>>> usable, right?
>>
>> I am aware of the 1.6tb.
>> Only the four 1tb drives + DVD
>> But I want to just stop the Raid all together. Looking for the "how to"
>> turn off raid on boot.
>
> Ah, NOW the light dawns. You're going to *adore* the answer (not!): break
> the RAID, and make each individual drive a logical drive, and I think
> you'll be forced to tell it RAID 0. That's the only way I know of.
>
> mark
>
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
So just to clarify, you are actually entering the proper RAID interface for accessing your drives, right?
A new dell with an add on raid card will, in some cases, have two raid interfaces during boot up. One for stock internal RAID, and one for the LSI RAID. If you have the upgraded raid card, you maybe be entering the wrong interface for accessing the raid. Also, if this is new, you could easily get a chat going with Dell to help break the RAID like the previous answer suggested.
Either way the RAID card driver is not supported with the Linux distro you've chosen and would need to be added. It's not hard, just takes some googling and use of centos.org howtos
So, question is, when in the RAID interface that you actually see, you cannot destroy what is there? If that's the case I believe the raid interface is reading "RAID" or member from the beginning of the hard drives and they will be unusable until you break the raid in the actual interface.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
