Please stop top posting.
Norman Schklar wrote:
> mark wrote
> Norm Schklar
> On Thu, May 30, 2013 at 10:42 AM, <m.roth@xxxxxxxxx> wrote:
>> Norman Schklar wrote:
>> > On Thu, May 30, 2013 at 10:23 AM, <m.roth@xxxxxxxxx> wrote:
>> >> Norman Schklar wrote:
>> >> > Seems I need to disable RAID, but don't find the option in the
>> >> > bios. 4ea 1 terabyte drives in raid 10 is the current setup.
<snip>
>> > Centor 6.4 doesn't find the drives.
>> > I use Ctrl E, to open the raid console but it doesn't have an option
>> > to disable. So each time it boots I get the raid init.
<snip>
>> Oh. You're using LSI? What's the hardware card? I don't think fakeRAID,
>> the Intel on-motherboard thing, uses them. If you've got a *real* RAID
>> card in there, then you *should* use it - you don't need the software
>> RAID.
>>
>> For that, what you need to do is to create logical drives - follow the
>> steps, chose the type of RAID, etc. in the firmware. *THEN*, once you've
>> created the logical drives, when you reboot, the systems *will* see them
>> as though they were physical drives.
>>
>> Does what I'm saying make sense to you?
>>
> Yes it makes sense. But it came configured for Raid 10 2 ea 2 terabye
> drives. Centos 6.4 doesn't recognize any drive..
Does the system have other drives than the RAID? You mention it booting -
you *are* aware that with RAID 10, you'll have something like 1.6TB
usable, right?
mark
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
