Re: Changes at Red Hat confouding CentOS (was: What happened to 6.1)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On 11/15/2011 05:55 PM, m.roth@xxxxxxxxx wrote:
> Dennis Jacobfeuerborn wrote:
>> On 11/15/2011 05:23 PM, m.roth@xxxxxxxxx wrote:
>>> Les Mikesell wrote:
>>>> On Tue, Nov 15, 2011 at 7:56 AM, Timothy Murphy<gayleard@xxxxxxxxxx>
>>>> wrote:
>>>>>
>>>>> Incidentally, I don't really understand
>>>>> what is meant by the term "desktop" nowadays.
>>>>> I always think of it as a contrast to laptop.
>>>>
>>>> 'Desktop' is in contrast to 'server'.  On a server, you only reboot to
>>>> load a new kernel and you never use the console display, rarely change
>>>
>>> Oh, I dunno - it's not infrequently that I have to plug in a
>>> monitor-on-a-stick....
>>
>> Supermicro boards come with IPMI on-board these days so you can do all
>> that work that you previously did standing next to the server from the
>> confines of your cozy home. This is even more useful when you server is
>> sitting in a rack in a cold, noisy, dry collocation facility.
>
> Um, reality check time: what colo? I've got two server rooms, er,
> "computer labs", and a very small one. In the two, we've got maybe 150 or
> more servers. We don't have them all wired with IPMI. In fact, we don't
> have any of them cabled that way. Lessee, wouldn't that be an extra port
> for each server? Or a few servers with their own switches, and all those
> servers cabled?

No, you can share the interface so you don't need any extra cables/ports at 
all.

  That's a lot of work for the three of us, *and* there are
> plenty of times when no, IPMI either a) doesn't work, or b) you have to
> physically powercycle the damn thing. Or the one that I have to run down

You can physically power cycle the system with IPMI.

> to and hit<f1>  so it'll finish posting. Or be there because I forgot to
> tell it fastboot before I rebooted it (or it rebooted), and I have to
> powercycle it, because, as a production box, we can't wait four or six
> hours for the fsck to complete. (Don't get me started on *that* state of
> affairs.)

You can hit <f1> using the IPMI console. You can also modify the BIOS settings.

The IPMI controller is a completely separate system. You can physically 
shut down the computer and still connect to the IPMI subsystem/web 
interface and power it back on remotely.

Obviously if you don't have IPMI on some systems or cannot use it for other 
reasons then that's tragic but inevitable. All I'm saying is that for new 
system you should strongly consider it. Back in the days you actually 
needed to buy an additional card for this but as I said on Supermicro 
boards/systems you now get this on-board and it simplifies administration 
greatly. Just a few days ago I had to re-install a system and in the 
process change the SATA settings from IDE to AHCI in the bios. In the past 
I had to go to the server to do this. Together with the managed switches I 
can completely revamp the entire infrastructure if I wanted to and wouldn't 
even have to leave my home to do it.

Regards,
   Dennis
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux