I have managed perfectly fine to install centos 5.5 x64 on a new sun blade x6270 server module .i had to install in text mode since GUI install mode was not working
Actually this machine is going to replace my current working very low hardware server
the server is used as my primary dns, mail server , webmail server also running Mailscanner, mailwatch etc.
Also I want to use this new sun blade server as a virtual machine using xen
i have installed xen and uts fine
but i have a issue with the diplay driver
I did run system-config-network and selected the card as ast-ASpeedTech chipsets since my lspci says i have a
20:05.0 VGA compatible controller: ASPEED Technology, Inc. ASPEED Graphics Family (rev 10)
now I run startx and i get the below error
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.18-53.el5 x86_64 Red Hat, Inc.
Current Operating System: Linux kmundns 2.6.18-194.26.1.el5xen #1 SMP Tue Nov 9 13:35:30 EST 2010 x86_64
Build Date: 17 November 2010
Build ID: xorg-x11-server 1.1.1-48.76.el5_5.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 16 21:17:19 2010
(==) Using config file: "/etc/X11/xorg.conf"
dlopen: /usr/lib64/xorg/modules/drivers/ast_drv.so: wrong ELF class: ELFCLASS32
(EE) Failed to load /usr/lib64/xorg/modules/drivers/ast_drv.so
(EE) Failed to load module "ast" (loader failed, 7)
(EE) No drivers available.
Fatal server error:
no screens found
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
---------------------------------------------------------
then i did change the driver to vesa and running startx shows me as below
xauth: creating new authority file /root/.serverauth.16448
X Window System Version 7.1.1
Release Date: 12 May 2006
X Protocol Version 11, Revision 0, Release 7.1.1
Build Operating System: Linux 2.6.18-53.el5 x86_64 Red Hat, Inc.
Current Operating System: Linux kmundns 2.6.18-194.26.1.el5xen #1 SMP Tue Nov 9 13:35:30 EST 2010 x86_64
Build Date: 17 November 2010
Build ID: xorg-x11-server 1.1.1-48.76.el5_5.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 16 21:10:35 2010
(==) Using config file: "/etc/X11/xorg.conf"
(EE) VESA(0): No valid modes
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
XIO: fatal IO error 104 (Connection reset by peer) on X server ":0.0"
after 0 requests (0 known processed) with 0 events remaining.
------------------------------------------------------------
i really apprecite if someone out there would help me and advise
Thanks and Regards
simon
I really need the graphic to setup virtual machine since in GUI is quite simple
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
