use parted to create "raw paration"????

[mcclnx mcc <mcclnx@xxxxxxxxxxxx>]

we have CENTOS 5.5 on X86.  I tried to create a "raw partition" (NOT FS) on a disk and it continue to show "ext3".  How can I get ride of it?


===   procedures=====

# parted /dev/sde
GNU Parted 1.8.1
Using /dev/sde
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) p                                                                

Model: DELL PERC 5/E Adapter (scsi)
Disk /dev/sde: 3146GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End    Size   File system  Name      Flags
 1      17.4kB  120GB  120GB               primary        
 2      120GB   240GB  120GB  ext3         primary2  
     
(parted) rm 2                                                             
(parted) p                                                                

Model: DELL PERC 5/E Adapter (scsi)
Disk /dev/sde: 3146GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End    Size   File system  Name     Flags
 1      17.4kB  120GB  120GB             

(parted) mkpart prm2 120g 240g                                            
(parted) p                                                                

Model: DELL PERC 5/E Adapter (scsi)
Disk /dev/sde: 3146GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt

Number  Start   End    Size   File system  Name     Flags
 1      17.4kB  120GB  120GB               primary       
 2      120GB   240GB  120GB  ext3         prm2          



      
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos