On 10/20/2010 02:13 PM, centos@xxxxxxxxxxxxxx wrote:
Hmm...On Wed, 20 Oct 2010 14:04:51 -0400, you wrote:To get mine to work under fedora I had to run ethtool and turn on the wol option. Also it seemed to get reset after used wol to start it up so in my rc.local I put /sbin/ethtool -s eth1 wol g /sbin/ethtool -s eth0 wol gethtool -s eth0 wol g results in a message "Cannot get current wake-on-lan settings: Operation not supported" even though both the motherboard and NIC do support WOL. [root@centostest ~]# ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: d Current message level: 0x00000007 (7) Link detected: yes [root@centostest ~]# ethtool -s eth0 wol g [root@centostest ~]# uname -a Linux centostest 2.6.18-164.6.1.el5 #1 SMP Tue Nov 3 16:18:27 EST 2009 i686 athlon i386 GNU/Linux [root@centostest ~]# ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Advertised auto-negotiation: Yes Speed: 100Mb/s Duplex: Full Port: MII PHYAD: 32 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000007 (7) Link detected: yes [root@centostest ~]# --
Stephen Clark NetWolves Sr. Software Engineer III Phone: 813-579-3200 Fax: 813-882-0209 Email: steve.clark@xxxxxxxxxxxxx http://www.netwolves.com |
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos