Re: Getting Wake on lan to work

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Fri, 08 Oct 2010 16:25:26 -0700, you wrote:

>on 10-6-2010 2:27 PM Robert Heller spake the following:
>> At Wed, 06 Oct 2010 21:33:25 +0100 CentOS mailing list <centos@xxxxxxxxxx> wrote:
>> 
>>>
>>> My system is: 
>>> Intel CC820 motherboard (which supports PME# wake up for wake on LAN)
>>> 3com 3C905C which also supports wake on LAN via PME#
>>> Linux 5.5
>>>
>>> The motherboard BIOS is later than one that reports an issue with WOL
>>> and this particular network card was fixed.
>>>

>> 
>If the card goes dark when the system is off but still plugged in, the card
>does not get its power and signal from the pci bus and will need the header
>cable plugged in. There is no other way... The card HAS to be powered from
>somewhere at all times so it can activate the system.


I have now purchased a WOL cable but that has not helped.

There are no options in the BIOS for WOL and I have updated to the
latest.

I have found this page http://ubuntuforums.org/showthread.php?t=951563
which refers to using pci-config to force the bus power to be left on
for the card prior to shutting down. Could this be the problem and if
so where do I get pci-config (or the equivalent) for Centos as I can't
identify a package to install that.
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux