mv initrd-2.4.21-27.0.2.ELsmp.img initrd-2.4.21-27.0.2.ELsmp.img_orig
copy 3w-9xxx.o for your system to
/lib/modules/2.4.21-27.0.2.ELsmp/kernel/drivers/scsi
make sure there is an entry in /etc/modules.conf like this:
alias scsi_hostadapter1 3w-9xxx
The entry: scsi_hostadapter1 in the above may be different....
run mkinitrd /boot/initrd-2.4.21-27.0.2.ELsmp.img 2.4.21-27.0.2.Elsmp
Now you have the driver install done try it by rebooting and see if the 9500
is mounted at boot time.
Seth Bardash
Integrated Solutions and Systems
719-495-5866
Failure can not cope with perseverance!
> -----Original Message-----
> From: centos-bounces@xxxxxxxxxxx
> [mailto:centos-bounces@xxxxxxxxxxx] On Behalf Of Sven
> Sent: Friday, February 25, 2005 1:51 PM
> To: 'CentOS discussion and information list'
> Subject: AW: [Centos] How to install 3ware Modules?
>
> In /boot i have the initrd-2.4.21-27.0.2.ELsmp.img
> But what i must do exactly now?
>
> -----Urspr?ngliche Nachricht-----
> Von: centos-bounces@xxxxxxxxxxx [mailto:centos-bounces@xxxxxxxxxxx] Im
> Auftrag von Hirsh, Joshua
> Gesendet: Freitag, 25. Februar 2005 21:05
> An: 'CentOS discussion and information list'
> Betreff: RE: [Centos] How to install 3ware Modules?
>
> > Or have you another good way to install the driver because
> the problem
> > is that if the driver is not in the kernel the raid will
> not boot from
> > them or?
>
>
> Two words: initrd image.
>
> Google can help you out quite easily with creating one.
>
>
>
> Regards,
>
> -Joshua
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxxx
> http://lists.caosity.org/mailman/listinfo/centos
>
>
>
>
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxxx
> http://lists.caosity.org/mailman/listinfo/centos
>
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 266.4.0 - Release Date: 2/22/2005
