Re: CGL 5.0 Registration - Enea Linux

[Alexandru Vaduva via Lf_carrier <lf_carrier@xxxxxxxxxxxxxxxxxxxxxxxxxx>]

Hello Cosmin,

I'm sorry about the delay on this.

From my point of view the registration is successful.

The next step involves updating the "Registered Distributions" page with the company information.

I will need a link to your public disclosure spreadsheet because the CGL workgroup does not host the disclosure documents
on the Linux Foundation website. Also the company logo will need to be provided.

Thanks, and again, please accept my sincere apology for missing this for so long.

Alex V. (on behalf of the CGL workgroup)

On Monday, December 21, 2015 1:09 PM, Cosmin Moldoveanu <Cosmin.Moldoveanu@xxxxxxxx> wrote:

Hello Alexandru, All,

 

Firstly, I would like to thank you for your prompt answer!

Regarding your questions below:

- We consider STD 26.2 as fulfilled by a Kernel/Package combination, as Linux Kernel has support for L2TPv3, including IPv6 endpoints starting Linux 3.5.  

- Regarding SMM7.1-3: P2041rdb board does not have IPMI support indeed, therefore openipmi package should be seen more like software support when it comes to these requirements. For SMM7.1-3 we’ve used lm_sensors package for monitoring, therefore I will amend the registration form accordingly (please find attached).

 

Please let me know if the provided information is considered to be sufficient at this point – in that case, we will also provide the company logo and the public disclosure link for Enea Carrier Grade Linux 5.0.

 

Regards,

Cosmin

 

 

From: Alexandru Vaduva [mailto:vaduvajanalexandru@xxxxxxxxx]
Sent: Sunday, December 20, 2015 11:28 PM
To: Cosmin Moldoveanu <Cosmin.Moldoveanu@xxxxxxxx>; lf_carrier@xxxxxxxxxxxxxxxxxxxxxxxxxx
Cc: Alexandru. Vaduva <alexandru.vaduva@xxxxxxxxx>
Subject: Re: CGL 5.0 Registration - Enea Linux

 

Hello Cosmin,,

 

It seems that your submission was quite straightforward, but there are a couple of  questions that came during the review:

STD.26.2 - mentions that support for L2TPv3 is necessary and it seems that the package openl2tp has only L2TPv2 version support.

SMM.7.1, SMM.7.2, SMM.7.3 - you indicate openipmi as the package that solves these requirements but unfortunately I was not able to identify IPMI hardware support for the processor architecture that you indicate, am I missing information on this one?

 

Your help with this question is really appreciated. In case the answers will require updating the registration template, a new amended submission will be necessary. Otherwise the next step would require from your side to provide with the company logo and also a corresponding public disclosures link for the Enea Carrier Grade Linux distribution. You can use as inspiration the already registered distributions link: Registered Distributions

				Registered Distributions The Linux Foundation is a non-profit consortium dedicated to fostering the growth of Linux, and promoting standardization and technical collaboration of Open Source...
				View on www.linuxfoundatio...	Preview by Yahoo

 

 

 

Alexandru Vaduva (on behalf of the CGL workgroup).

 

On Tuesday, December 8, 2015 11:05 AM, Cosmin Moldoveanu <Cosmin.Moldoveanu@xxxxxxxx> wrote:

 

Hi Alexandru,

 

Thank you for your reply! I will gladly answer to your questions.

Regarding GAPs, we did not claim support for any of them indeed - we are aware of them still, at this stage, validation of those features was not part of our main focus.

 

Regards,

Cosmin

 

From: Alexandru Vaduva [mailto:vaduvajanalexandru@xxxxxxxxx]
Sent: Tuesday, December 08, 2015 12:05 AM
To: Cosmin Moldoveanu <Cosmin.Moldoveanu@xxxxxxxx>; lf_carrier@xxxxxxxxxxxxxxxxxxxxxxxxxx
Cc: Alexandru.Vaduva <alexandru.vaduva@xxxxxxxxx>
Subject: Re: CGL 5.0 Registration - Enea Linux

 

Hello Cosmin,

Thanks for your interest in the CGL specification and the workgroup.

Since this is the first time Enea is registering for the CGL certification the process might be a bit more tedious. There might be a couple of questions that  could come up during the review, hoping that you can help me.

 

Also, you have not claimed support for any GAPs. You do not need to for the registration, but I wanted to make sure that you were aware of them in case you did want to disclose support for some of those features.

 

 

Alexandru Vaduva (on behalf of the CGL workgroup).

 

 

On Monday, December 7, 2015 1:53 PM, Cosmin Moldoveanu <Cosmin.Moldoveanu@xxxxxxxx> wrote:

 

/C

-----Original Message-----
From: Cosmin Moldoveanu
Sent: Thursday, November 19, 2015 3:32 PM
To: 'lf_cgl_registration@xxxxxxxxxxxxxxxxxxxxxxxxxx' <lf_cgl_registration@xxxxxxxxxxxxxxxxxxxxxxxxxx>
Subject: CGL 5.0 Registration - Enea Linux

Dear All,

Enea Linux is an Yocto Project compatible Linux based distribution - http://www.enea.com/linux .Starting Enea Linux 5.0, we have built a Carrier Grade Linux distribution for PPC32 platforms, based on meta-cgl layer.
Please find attached our registration file for CGL 5.0. For any additional information, please feel free to contact me at any time.

Regards,
Cosmin Moldoveanu
Chief Designer, Enea Linux
Enea Software AB

 

_______________________________________________
Lf_carrier mailing list
Lf_carrier@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/lf_carrier