> On Mon, Oct 16, 2023 at 12:01:31PM +0800, Kai-Heng Feng wrote: > > When inserting an SD7.0 card to Realtek card reader, it can trigger > > PCI slot Link down and causes the following error: > > Why does *inserting* a card cause a Link Down? > > > > [ 63.898861] pcieport 0000:00:1c.0: pciehp: Slot(8): Link Down > > [ 63.912118] BUG: unable to handle page fault for address: > ffffb24d403e5010 > [...] > > [ 63.912198] ? asm_exc_page_fault+0x27/0x30 > > [ 63.912203] ? ioread32+0x2e/0x70 > > [ 63.912206] ? rtsx_pci_write_register+0x5b/0x90 [rtsx_pci] > > [ 63.912217] rtsx_set_l1off_sub+0x1c/0x30 [rtsx_pci] > > [ 63.912226] rts5261_set_l1off_cfg_sub_d0+0x36/0x40 [rtsx_pci] > > [ 63.912234] rtsx_pci_runtime_idle+0xc7/0x160 [rtsx_pci] > > [ 63.912243] ? __pfx_pci_pm_runtime_idle+0x10/0x10 > > [ 63.912246] pci_pm_runtime_idle+0x34/0x70 > > [ 63.912248] rpm_idle+0xc4/0x2b0 > > [ 63.912251] pm_runtime_work+0x93/0xc0 > > [ 63.912254] process_one_work+0x21a/0x430 > > [ 63.912258] worker_thread+0x4a/0x3c0 > > This looks like pcr->remap_addr is accessed after it has been iounmap'ed in > rtsx_pci_remove() or before it has been iomap'ed in rtsx_pci_probe(). > > Is the card reader itself located below a hotplug port and unplugged here? Yes it is card reader unplug itself, because sd7.0 card is not used rtsx_pcr, it use nvme driver Ricky > Or is this about the card being removed from the card reader? > > Having full dmesg output and lspci -vvv output attached to a bugzilla would > help to understand what is going on. > > Thanks, > > Lukas
