Hi.
On Wed, 27 Jan 2021 at 23:23, Jiri Olsa <jolsa@xxxxxxxxxx> wrote:
>
> On Mon, Jan 25, 2021 at 01:06:23PM +0000, Giuliano Procida wrote:
> > pahole -J uses libelf directly when updating a .BTF section. However,
> > it uses llvm-objcopy to add .BTF sections. This commit switches to
> > using libelf for both cases.
> >
> > This eliminates pahole's dependency on llvm-objcopy. One unfortunate
> > side-effect is that vmlinux actually increases in size. It seems that
> > llvm-objcopy modifies the .strtab section, discarding many strings. I
> > speculate that is it discarding strings not referenced from .symtab
> > and updating the references therein.
> >
> > In this initial version layout is left completely up to libelf which
> > may be OK for non-loadable object files, but is probably no good for
> > things like vmlinux where all the offsets may change. This is
> > addressed in a follow-up commit.
> >
> > Signed-off-by: Giuliano Procida <gprocida@xxxxxxxxxx>
> > ---
> > libbtf.c | 145 ++++++++++++++++++++++++++++++++++++++-----------------
> > 1 file changed, 100 insertions(+), 45 deletions(-)
> >
> > diff --git a/libbtf.c b/libbtf.c
> > index 9f76283..fb8e043 100644
> > --- a/libbtf.c
> > +++ b/libbtf.c
> > @@ -699,6 +699,7 @@ static int btf_elf__write(const char *filename, struct btf *btf)
> > uint32_t raw_btf_size;
> > int fd, err = -1;
> > size_t strndx;
> > + void *str_table = NULL;
> >
> > fd = open(filename, O_RDWR);
> > if (fd < 0) {
> > @@ -741,74 +742,128 @@ static int btf_elf__write(const char *filename, struct btf *btf)
> > }
> >
> > /*
> > - * First we look if there was already a .BTF section to overwrite.
> > + * First we check if there is already a .BTF section present.
> > */
> > -
> > elf_getshdrstrndx(elf, &strndx);
> > + Elf_Scn *btf_scn = 0;
>
> NULL
>
>
> SNIP
>
> > - const char *llvm_objcopy;
> > - char tmp_fn[PATH_MAX];
> > - char cmd[PATH_MAX * 2];
> > -
> > - llvm_objcopy = getenv("LLVM_OBJCOPY");
> > - if (!llvm_objcopy)
> > - llvm_objcopy = "llvm-objcopy";
> > -
> > - /* Use objcopy to add a .BTF section */
> > - snprintf(tmp_fn, sizeof(tmp_fn), "%s.btf", filename);
> > - close(fd);
> > - fd = creat(tmp_fn, S_IRUSR | S_IWUSR);
> > - if (fd == -1) {
> > - fprintf(stderr, "%s: open(%s) failed!\n", __func__,
> > - tmp_fn);
> > + /* Add ".BTF" to the section name string table */
> > + Elf_Data *str_data = elf_getdata(str_scn, NULL);
> > + if (!str_data) {
> > + fprintf(stderr, "%s: elf_getdata(str_scn) failed: %s\n",
> > + __func__, elf_errmsg(elf_errno()));
> > goto out;
> > }
> > -
> > - if (write(fd, raw_btf_data, raw_btf_size) != raw_btf_size) {
> > - fprintf(stderr, "%s: write of %d bytes to '%s' failed: %d!\n",
> > - __func__, raw_btf_size, tmp_fn, errno);
> > - goto unlink;
> > + dot_btf_offset = str_data->d_size;
> > + size_t new_str_size = dot_btf_offset + 5;
> > + str_table = malloc(new_str_size);
> > + if (!str_table) {
> > + fprintf(stderr, "%s: malloc(%zu) failed: %s\n", __func__,
> > + new_str_size, elf_errmsg(elf_errno()));
> > + goto out;
> > }
> > + memcpy(str_table, str_data->d_buf, dot_btf_offset);
> > + memcpy(str_table + dot_btf_offset, ".BTF", 5);
>
> hum, I wonder this will always copy the final zero byte
It should, as strlen(".BTF") == 4.
> > + str_data->d_buf = str_table;
> > + str_data->d_size = new_str_size;
> > + elf_flagdata(str_data, ELF_C_SET, ELF_F_DIRTY);
> > +
> > + /* Create a new section */
> > + btf_scn = elf_newscn(elf);
> > + if (!btf_scn) {
> > + fprintf(stderr, "%s: elf_newscn failed: %s\n",
> > + __func__, elf_errmsg(elf_errno()));
> > + goto out;
> > + }
> > + btf_data = elf_newdata(btf_scn);
> > + if (!btf_data) {
> > + fprintf(stderr, "%s: elf_newdata failed: %s\n",
> > + __func__, elf_errmsg(elf_errno()));
> > + goto out;
> > + }
> > + }
> >
> > - snprintf(cmd, sizeof(cmd), "%s --add-section .BTF=%s %s",
> > - llvm_objcopy, tmp_fn, filename);
> > - if (system(cmd)) {
> > - fprintf(stderr, "%s: failed to add .BTF section to '%s': %d!\n",
> > - __func__, filename, errno);
> > - goto unlink;
> > + /* (Re)populate the BTF section data */
> > + raw_btf_data = btf__get_raw_data(btf, &raw_btf_size);
> > + btf_data->d_buf = (void *)raw_btf_data;
>
> doesn't this potentially leak btf_data->d_buf?
I believe libelf owns the original btf_data->d_buf and it could even
just be a pointer into mmaped memory, but I will check.
> > + btf_data->d_size = raw_btf_size;
> > + btf_data->d_type = ELF_T_BYTE;
> > + btf_data->d_version = EV_CURRENT;
> > + elf_flagdata(btf_data, ELF_C_SET, ELF_F_DIRTY);
> > +
> > + /* Update .BTF section in the SHT */
> > + GElf_Shdr btf_shdr_mem;
> > + GElf_Shdr *btf_shdr = gelf_getshdr(btf_scn, &btf_shdr_mem);
> > + if (!btf_shdr) {
> > + fprintf(stderr, "%s: elf_getshdr(btf_scn) failed: %s\n",
> > + __func__, elf_errmsg(elf_errno()));
> > + goto out;
> > + }
> > + btf_shdr->sh_entsize = 0;
> > + btf_shdr->sh_flags = 0;
> > + if (dot_btf_offset)
> > + btf_shdr->sh_name = dot_btf_offset;
> > + btf_shdr->sh_type = SHT_PROGBITS;
> > + if (!gelf_update_shdr(btf_scn, btf_shdr)) {
> > + fprintf(stderr, "%s: gelf_update_shdr failed: %s\n",
> > + __func__, elf_errmsg(elf_errno()));
> > + goto out;
> > + }
> > +
> > + if (elf_update(elf, ELF_C_NULL) < 0) {
> > + fprintf(stderr, "%s: elf_update (layout) failed: %s\n",
> > + __func__, elf_errmsg(elf_errno()));
> > + goto out;
> > + }
> > +
> > + size_t phnum = 0;
> > + if (!elf_getphdrnum(elf, &phnum)) {
> > + for (size_t ix = 0; ix < phnum; ++ix) {
> > + GElf_Phdr phdr;
> > + GElf_Phdr *elf_phdr = gelf_getphdr(elf, ix, &phdr);
> > + size_t filesz = gelf_fsize(elf, ELF_T_PHDR, 1, EV_CURRENT);
> > + fprintf(stderr, "type: %d %d\n", elf_phdr->p_type, PT_PHDR);
> > + fprintf(stderr, "offset: %lu %lu\n", elf_phdr->p_offset, ehdr->e_phoff);
> > + fprintf(stderr, "filesize: %lu %lu\n", elf_phdr->p_filesz, filesz);
>
> looks like s forgotten debug or you're missing
> btf_elf__verbose check for fprintf calls above
Oops, forgotten debug.
>
> jirka
>
Thanks,
Giuliano.
