[PATCH dwarves 2/4] btf_encoder: Add .BTF section using libelf

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



pahole -J uses libelf directly when updating a .BTF section. However,
it uses llvm-objcopy to add .BTF sections. This commit switches to
using libelf for both cases.

This eliminates pahole's dependency on llvm-objcopy. One unfortunate
side-effect is that vmlinux actually increases in size. It seems that
llvm-objcopy modifies the .strtab section, discarding many strings. I
speculate that is it discarding strings not referenced from .symtab
and updating the references therein.

In this initial version layout is left completely up to libelf which
may be OK for non-loadable object files, but is probably no good for
things like vmlinux where all the offsets may change. This is
addressed in a follow-up commit.

Signed-off-by: Giuliano Procida <gprocida@xxxxxxxxxx>
---
 libbtf.c | 145 ++++++++++++++++++++++++++++++++++++++-----------------
 1 file changed, 100 insertions(+), 45 deletions(-)

diff --git a/libbtf.c b/libbtf.c
index 9f76283..fb8e043 100644
--- a/libbtf.c
+++ b/libbtf.c
@@ -699,6 +699,7 @@ static int btf_elf__write(const char *filename, struct btf *btf)
 	uint32_t raw_btf_size;
 	int fd, err = -1;
 	size_t strndx;
+	void *str_table = NULL;
 
 	fd = open(filename, O_RDWR);
 	if (fd < 0) {
@@ -741,74 +742,128 @@ static int btf_elf__write(const char *filename, struct btf *btf)
 	}
 
 	/*
-	 * First we look if there was already a .BTF section to overwrite.
+	 * First we check if there is already a .BTF section present.
 	 */
-
 	elf_getshdrstrndx(elf, &strndx);
+	Elf_Scn *btf_scn = 0;
 	while ((scn = elf_nextscn(elf, scn)) != NULL) {
 		shdr = gelf_getshdr(scn, &shdr_mem);
 		if (shdr == NULL)
 			continue;
 		char *secname = elf_strptr(elf, strndx, shdr->sh_name);
 		if (strcmp(secname, ".BTF") == 0) {
-			btf_data = elf_getdata(scn, btf_data);
+			btf_scn = scn;
 			break;
 		}
 	}
 
-	raw_btf_data = btf__get_raw_data(btf, &raw_btf_size);
-
-	if (btf_data) {
-		/* Exisiting .BTF section found */
-		btf_data->d_buf = (void *)raw_btf_data;
-		btf_data->d_size = raw_btf_size;
-		elf_flagdata(btf_data, ELF_C_SET, ELF_F_DIRTY);
+	Elf_Scn *str_scn = elf_getscn(elf, strndx);
+	if (!str_scn) {
+		fprintf(stderr, "%s: elf_getscn(strndx) failed\n", __func__);
+		goto out;
+	}
 
-		if (elf_update(elf, ELF_C_NULL) >= 0 &&
-		    elf_update(elf, ELF_C_WRITE) >= 0)
-			err = 0;
-		else
-			fprintf(stderr, "%s: elf_update failed: %s.\n",
-				__func__, elf_errmsg(elf_errno()));
+	size_t dot_btf_offset = 0;
+	if (btf_scn) {
+		/* Existing .BTF section found */
+		btf_data = elf_getdata(btf_scn, NULL);
+		if (!btf_data) {
+			fprintf(stderr, "%s: elf_getdata failed: %s\n", __func__,
+				elf_errmsg(elf_errno()));
+			goto out;
+		}
 	} else {
-		const char *llvm_objcopy;
-		char tmp_fn[PATH_MAX];
-		char cmd[PATH_MAX * 2];
-
-		llvm_objcopy = getenv("LLVM_OBJCOPY");
-		if (!llvm_objcopy)
-			llvm_objcopy = "llvm-objcopy";
-
-		/* Use objcopy to add a .BTF section */
-		snprintf(tmp_fn, sizeof(tmp_fn), "%s.btf", filename);
-		close(fd);
-		fd = creat(tmp_fn, S_IRUSR | S_IWUSR);
-		if (fd == -1) {
-			fprintf(stderr, "%s: open(%s) failed!\n", __func__,
-				tmp_fn);
+		/* Add ".BTF" to the section name string table */
+		Elf_Data *str_data = elf_getdata(str_scn, NULL);
+		if (!str_data) {
+			fprintf(stderr, "%s: elf_getdata(str_scn) failed: %s\n",
+				__func__, elf_errmsg(elf_errno()));
 			goto out;
 		}
-
-		if (write(fd, raw_btf_data, raw_btf_size) != raw_btf_size) {
-			fprintf(stderr, "%s: write of %d bytes to '%s' failed: %d!\n",
-				__func__, raw_btf_size, tmp_fn, errno);
-			goto unlink;
+		dot_btf_offset = str_data->d_size;
+		size_t new_str_size = dot_btf_offset + 5;
+		str_table = malloc(new_str_size);
+		if (!str_table) {
+			fprintf(stderr, "%s: malloc(%zu) failed: %s\n", __func__,
+				new_str_size, elf_errmsg(elf_errno()));
+			goto out;
 		}
+		memcpy(str_table, str_data->d_buf, dot_btf_offset);
+		memcpy(str_table + dot_btf_offset, ".BTF", 5);
+		str_data->d_buf = str_table;
+		str_data->d_size = new_str_size;
+		elf_flagdata(str_data, ELF_C_SET, ELF_F_DIRTY);
+
+		/* Create a new section */
+		btf_scn = elf_newscn(elf);
+		if (!btf_scn) {
+			fprintf(stderr, "%s: elf_newscn failed: %s\n",
+			__func__, elf_errmsg(elf_errno()));
+			goto out;
+		}
+		btf_data = elf_newdata(btf_scn);
+		if (!btf_data) {
+			fprintf(stderr, "%s: elf_newdata failed: %s\n",
+			__func__, elf_errmsg(elf_errno()));
+			goto out;
+		}
+	}
 
-		snprintf(cmd, sizeof(cmd), "%s --add-section .BTF=%s %s",
-			 llvm_objcopy, tmp_fn, filename);
-		if (system(cmd)) {
-			fprintf(stderr, "%s: failed to add .BTF section to '%s': %d!\n",
-				__func__, filename, errno);
-			goto unlink;
+	/* (Re)populate the BTF section data */
+	raw_btf_data = btf__get_raw_data(btf, &raw_btf_size);
+	btf_data->d_buf = (void *)raw_btf_data;
+	btf_data->d_size = raw_btf_size;
+	btf_data->d_type = ELF_T_BYTE;
+	btf_data->d_version = EV_CURRENT;
+	elf_flagdata(btf_data, ELF_C_SET, ELF_F_DIRTY);
+
+	/* Update .BTF section in the SHT */
+	GElf_Shdr btf_shdr_mem;
+	GElf_Shdr *btf_shdr = gelf_getshdr(btf_scn, &btf_shdr_mem);
+	if (!btf_shdr) {
+		fprintf(stderr, "%s: elf_getshdr(btf_scn) failed: %s\n",
+			__func__, elf_errmsg(elf_errno()));
+		goto out;
+	}
+	btf_shdr->sh_entsize = 0;
+	btf_shdr->sh_flags = 0;
+	if (dot_btf_offset)
+		btf_shdr->sh_name = dot_btf_offset;
+	btf_shdr->sh_type = SHT_PROGBITS;
+	if (!gelf_update_shdr(btf_scn, btf_shdr)) {
+		fprintf(stderr, "%s: gelf_update_shdr failed: %s\n",
+			__func__, elf_errmsg(elf_errno()));
+		goto out;
+	}
+
+	if (elf_update(elf, ELF_C_NULL) < 0) {
+		fprintf(stderr, "%s: elf_update (layout) failed: %s\n",
+			__func__, elf_errmsg(elf_errno()));
+		goto out;
+	}
+
+	size_t phnum = 0;
+	if (!elf_getphdrnum(elf, &phnum)) {
+		for (size_t ix = 0; ix < phnum; ++ix) {
+			GElf_Phdr phdr;
+			GElf_Phdr *elf_phdr = gelf_getphdr(elf, ix, &phdr);
+			size_t filesz = gelf_fsize(elf, ELF_T_PHDR, 1, EV_CURRENT);
+			fprintf(stderr, "type: %d %d\n", elf_phdr->p_type, PT_PHDR);
+			fprintf(stderr, "offset: %lu %lu\n", elf_phdr->p_offset, ehdr->e_phoff);
+			fprintf(stderr, "filesize: %lu %lu\n", elf_phdr->p_filesz, filesz);
 		}
+	}
 
-		err = 0;
-	unlink:
-		unlink(tmp_fn);
+	if (elf_update(elf, ELF_C_WRITE) < 0) {
+		fprintf(stderr, "%s: elf_update (write) failed: %s\n",
+			__func__, elf_errmsg(elf_errno()));
+		goto out;
 	}
+	err = 0;
 
 out:
+	if (str_table)
+		free(str_table);
 	if (fd != -1)
 		close(fd);
 	if (elf)
-- 
2.30.0.280.ga3ce27912f-goog




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux