mp here, Well, brought minicom up, and set those settings as best I could. Still get serial port not ready from artic...how would I set those serial port commands you spoke of...xon/xoff or the other one that I can't remember right off,a nd I don't have your other message handy right this second to read it. Thanks. Mark Peveto Registered Linux user number 600552 Everything happens after coffee! On Tue, 9 May 2017, Linux for blind general discussion wrote: > I was not giving commands, I was making reference to serial port parameters. > use minicom and try > 9600 for speed, 8 data bits, and 1 stop bits and no parity. > see if you get feedback with that. > kp > > > > On Tue, 9 May 2017, Linux for blind general discussion wrote: > > > Mp heree. > > when I type xon/xoff or the other command you mentioned, vinux reports > > commands not valid. > > I did just get minicom installed, though. > > > > > > Mark Peveto > > Registered Linux user number 600552 > > Everything happens after coffee! > > > > On Tue, 9 May 2017, Linux for blind general discussion wrote: > > > > > you should probably set 9600 for speed, 8,n,1 8 bits, 1 stop bit, no > > > parity. > > > you may have to try xon/xoff or rts/cts for handshaking. > > > I think it should be rts/cts, however. > > > Then you can load up minicom, set the same parameters with it, and you > > > should > > > be able to output text which the synth will read. > > > When you can do that, you should be able to load speakup with it. > > > kp > > > > > > > > > > > > On Tue, 9 May 2017, Linux for blind general discussion wrote: > > > > > > > Mp here, > > > > Yeah, you're right. I've been through the setup, but have no idea what > > > > to > > > > set to what. I tried guessing at a few settings, but no luck. > > > > > > > > > > > > > > > > Mark Peveto > > > > Registered Linux user number 600552 > > > > Everything happens after coffee! > > > > > > > > On Tue, 9 May 2017, Linux for blind general discussion wrote: > > > > > > > > > This is Kelly. > > > > > I seem to recall the transport had a config mode to setup the serial > > > > > port > > > > > correctly... > > > > > I think there is a little button on it to do that. > > > > > I cannot remember the steps, however. > > > > > kp > > > > > > > > > > > > > > > > > > > > On Tue, 9 May 2017, Linux for blind general discussion wrote: > > > > > > > > > > > There is someone I know who might have an idea. will share this > > > > > > post > > > > > > and > > > > > > see if they can help you. > > > > > > Karen > > > > > > > > > > > > > > > > > > On Tue, 9 May 2017, Linux for blind general discussion wrote: > > > > > > > > > > > > > I got the serial cord this afternoon. I've connected it to the > > > > > > > transport, > > > > > > > yet it still reports serial port notready. Not sure how to > > > > > > > precede > > > > > > > from > > > > > > > here, as I'm not able to find documentation. > > > > > > > > > > > > > > > > > > > > > Mark Peveto > > > > > > > Registered Linux user number 600552 > > > > > > > Everything happens after coffee! > > > > > > > > > > > > > > _______________________________________________ > > > > > > > Blinux-list mailing list > > > > > > > Blinux-list@xxxxxxxxxx > > > > > > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > Blinux-list mailing list > > > > > > Blinux-list@xxxxxxxxxx > > > > > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > Blinux-list mailing list > > > > > Blinux-list@xxxxxxxxxx > > > > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > > > > _______________________________________________ > > > > Blinux-list mailing list > > > > Blinux-list@xxxxxxxxxx > > > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > _______________________________________________ > > > Blinux-list mailing list > > > Blinux-list@xxxxxxxxxx > > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > > > > _______________________________________________ > > Blinux-list mailing list > > Blinux-list@xxxxxxxxxx > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > _______________________________________________ > Blinux-list mailing list > Blinux-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/blinux-list > _______________________________________________ Blinux-list mailing list Blinux-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/blinux-list