Speaking of Outloud, is it voxin nowadays that is the way to go if you
want something based on Outloud?
On Wed, 22 Feb 2017, Jude DaShiell wrote:
I got through the make step and set DTK_PROGRAM=espeak with an export command
but when I do sudo -H make install the install errors out complaining it
can't build outloud. Very good reason it can't build outloud, it's not on
this machine. I'm doing this build on archlinux and used emacspeak-git as
source for the build. One thing I found out, python-mode is required to
build emacspeak. Failure to have installed generates an error.
--
_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list
On Thu, 23 Feb 2017, Chris Brannon wrote:
Jude DaShiell <jdashiel@xxxxxxxxx> writes:
but when I do sudo -H make install the install errors out
complaining it can't build outloud. Very good reason it can't build
outloud, it's not on this machine.
Hey Jude,
This probably needs to be fixed in the emacspeak source, but here's a
temporary workaround that will hopefully work for you.
Try running
touch servers/linux-outloud/atcleci.so
from the root of the emacspeak source tree.
make will be fooled into installing a dummy atcleci.so. That's fine,
since you don't have outloud on that machine.
-- Chris
_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list
On Thu, 23 Feb 2017, Jude DaShiell wrote:
Okay, that touch command once run as directed got emacspeak installed.
That includes the info files for emacspeak too. This should be easier than
modifying a Makefile and the install step is going to be moved out of the
Makefile for the next version of emacspeak too. I've used sendmail-HOWTOs
that were easier than this in my past and still have the old instructions for
them here in braille.
On Thu, 23 Feb 2017, Chris Brannon wrote:
Date: Thu, 23 Feb 2017 11:44:06
From: Chris Brannon <chris@xxxxxxxxxxxxxxxx>
Reply-To: Linux for blind general discussion <blinux-list@xxxxxxxxxx>
To: blinux-list@xxxxxxxxxx
Subject: Re: emacspeak build
Jude DaShiell <jdashiel@xxxxxxxxx> writes:
but when I do sudo -H make install the install errors out
complaining it can't build outloud. Very good reason it can't build
outloud, it's not on this machine.
Hey Jude,
This probably needs to be fixed in the emacspeak source, but here's a
temporary workaround that will hopefully work for you.
Try running
touch servers/linux-outloud/atcleci.so
from the root of the emacspeak source tree.
make will be fooled into installing a dummy atcleci.so. That's fine,
since you don't have outloud on that machine.
-- Chris
_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list
--
_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list
On Thu, 23 Feb 2017, Jude DaShiell wrote:
emacspeak default server is now outloud and I think the Makefile has it
hard-coded in so no other servers will build with it and work. For that
reason just to run emacspeak buying outloud isn't worth it since I've had and
have other screen readers working for years already on Linux.
On Thu, 23 Feb 2017, Jude DaShiell wrote:
Date: Thu, 23 Feb 2017 12:21:43
From: Jude DaShiell <jdashiel@xxxxxxxxx>
Reply-To: Linux for blind general discussion <blinux-list@xxxxxxxxxx>
To: Linux for blind general discussion <blinux-list@xxxxxxxxxx>
Subject: Re: emacspeak build
Okay, that touch command once run as directed got emacspeak installed.
That includes the info files for emacspeak too. This should be easier than
modifying a Makefile and the install step is going to be moved out of the
Makefile for the next version of emacspeak too. I've used sendmail-HOWTOs
that were easier than this in my past and still have the old instructions
for them here in braille.
On Thu, 23 Feb 2017, Chris Brannon wrote:
Date: Thu, 23 Feb 2017 11:44:06
From: Chris Brannon <chris@xxxxxxxxxxxxxxxx>
Reply-To: Linux for blind general discussion <blinux-list@xxxxxxxxxx>
To: blinux-list@xxxxxxxxxx
Subject: Re: emacspeak build
Jude DaShiell <jdashiel@xxxxxxxxx> writes:
but when I do sudo -H make install the install errors out
complaining it can't build outloud. Very good reason it can't build
outloud, it's not on this machine.
Hey Jude,
This probably needs to be fixed in the emacspeak source, but here's a
temporary workaround that will hopefully work for you.
Try running
touch servers/linux-outloud/atcleci.so
from the root of the emacspeak source tree.
make will be fooled into installing a dummy atcleci.so. That's fine,
since you don't have outloud on that machine.
-- Chris
_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list
--
_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list
On Thu, 23 Feb 2017, Chris Brannon wrote:
Jude DaShiell <jdashiel@xxxxxxxxx> writes:
emacspeak default server is now outloud and I think the Makefile has
it hard-coded in so no other servers will build with it and work. For
that reason just to run emacspeak buying outloud isn't worth it since
I've had and have other screen readers working for years already on
Linux.
Yeah it works fine with other servers. Did you run "make espeak" before
make install? The destination directory where emacspeak is installed should
have a file servers/linux-espeak/tclespeak.so.
If not, perhaps try "make espeak" and then redo the make install?
-- Chris
_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list
On Thu, 23 Feb 2017, Jude DaShiell wrote:
Yes, and that had no effect. On Thu, 23 Feb 2017, Chris Brannon wrote:
Date: Thu, 23 Feb 2017 14:19:49
From: Chris Brannon <chris@xxxxxxxxxxxxxxxx>
Reply-To: Linux for blind general discussion <blinux-list@xxxxxxxxxx>
To: Linux for blind general discussion <blinux-list@xxxxxxxxxx>
Subject: Re: emacspeak build
Jude DaShiell <jdashiel@xxxxxxxxx> writes:
emacspeak default server is now outloud and I think the Makefile has
it hard-coded in so no other servers will build with it and work. For
that reason just to run emacspeak buying outloud isn't worth it since
I've had and have other screen readers working for years already on
Linux.
Yeah it works fine with other servers. Did you run "make espeak" before
make install? The destination directory where emacspeak is installed
should
have a file servers/linux-espeak/tclespeak.so.
If not, perhaps try "make espeak" and then redo the make install?
-- Chris
_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list
--
_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list
_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list