Actually slackware 12.1 needs the same kind of help for its installer
program for the same reason. Maybe setting terminal type to dumb might
work. One problem I had with speakup.s on slackware 12.1 was getting it
to install correctly on the hard drive in the first place. I might try to
get around this by chroot . in the /kernels/speakup.s directory on the
slackware 12.1 cd before I run setup but have no idea if this really will
work.
On Mon, 16 Jun 2008, Martin McCormick wrote:
I have been using ssh on a speakup-equipped Oralux
system to access other UNIX boxes with fairly good results but I
ran in to something I haven't been able to solve yet.
The terminal type defined on this system if you type
echo $TERM is linux and I hadn't had any real problem using the
arrow keys, etc so things seemed normal enough.
Here is what I did that didn't work:
I used ssh to get in to a Linux box that has c-kermit on
board and a serial port. I used that serial port to communicate
with the serial console on a new box that will eventually have
FreeBSD UNIX. When I was using an old P.C. with DOS and
DOS-Kermit as the terminal emulator, this would work correctly.
Under the Linux and speakup console, I am hearing all
the VT100 sequences along with the text that the installer
program is printing to the screen. If I read the full screen
after the data stop coming in, it is all there and readable, but
listening to it as it comes in is a real chore.
I did tell .bash_profile to set the TERM environment
variable to vt100 but this had no effect other than it does now
show vt100 instead of Linux as the TERM type.
Are there any other things I might try to end up with a
more sequential output and no escape sequences?
I think the full-screen output from the FreeBSD
installer does send the data fairly much as one would read it as
I haven't had any problems with the old DOS system and I don't
have problems with other full-screen applications such as lynx
but I really can't use the installer right now because the data
are so garballed.
Strangely enough, the arrow keys still work but one
needs to know for sure where you just went before you enter the
wrong information and have to start over.
Thank you.
Martin McCormick WB5AGZ Stillwater, OK
Systems Engineer
OSU Information Technology Department Network Operations Group
_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list
_______________________________________________
Blinux-list mailing list
Blinux-list@xxxxxxxxxx
https://www.redhat.com/mailman/listinfo/blinux-list