[quoted lines by michaelweaver on 2007/07/02 at 18:33 +0100] >Does the Braillenote need to be connected to the PC during a Linux >installation before it can be used? I don't understand your question. If you want to use it during an install then, of course, it must be connected during that install. If you just want to use it later then you just need to connect it later. The application which makes it work as a braille display is brltty, so you really only need it connected while brltty is running. >Also will I need to select any keywords or serial port for the >Braillenote? You'll need to tell brltty which serial port your BrailleNote is connected to. You can do this via brltty's -d option or via its braille-device configuration file directive. Specify something like: serial:ttyS0 -- Dave Mielke | 2213 Fox Crescent | I believe that the Bible is the Phone: 1-613-726-0014 | Ottawa, Ontario | Word of God. Please contact me EMail: dave@xxxxxxxxx | Canada K2A 1H7 | if you're concerned about Hell. http://FamilyRadio.com/ | http://Mielke.cc/bible/ _______________________________________________ Blinux-list mailing list Blinux-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/blinux-list