Hi again, Well, I have now looked at these files and I see that it is active from the boot. But, I have also tried Redhat 9 on this machine and I found that my network works just fine with it so I am thinking about changing to Redhat 9 instead of Fedora. If so, then another question! If I select to isntall everything as I did in Fedora, will Genome be the standard X-enmviroment or will it be the KDE-desktop? Best regards, Christian ----- Original Message ----- From: < willem@xxxxxxxxxxxxxxxxx > To: < blinux-list@xxxxxxxxxx > Sent: Wednesday, February 04, 2004 8:10 AM Subject: Re: Networking in Fedora > Hi, > look at the following files: > /etc/sysconfig/network-scripts/ifcfg-eth0 > That is the file that has the configuration information in. > Also look at /etc/sysconfig/network > The gateway setting might be in that one. > The bootproto setting in /etc/sysconfig/network-scripts/ifcfg-eth0 > determines if > you are using static or dhcp. > You can make changes using a text editor and then do > service network restart for the settings to take effect. > As a blind person i find it a lot easyer to edit these files than to try > using the various configuration tools. > hth > Willem > > On Tue, 3 Feb 2004, Christian Moller wrote: > > > Hi Marian, > > OK, I'll go ahead and see what works! > > Best regards and many thakns, > > Christian > > > > > > ----- Original Message ----- > > From: "Marian Selea" < mselea@xxxxxxxxx > > > To: < blinux-list@xxxxxxxxxx > > > Sent: Tuesday, February 03, 2004 4:51 PM > > Subject: Re: Networking in Fedora > > > > > > > > > > Well... I'll confess!: I am not bad at all in networking, but I do not > > know fedora.... There are three main dhcp clients spread out with linux > > distribs.... Please try the appropriate command, apllying to yours: > > > > > > > > > $ /sbin/dhcpcd eth0 > > > > > > $ /sbin/pump -i eth0 > > > > > > $ /sbin/dhclient eth0 > > > > > > IMPORTANT!L Use these commands as being logged as root.... > > > > > > Good luck! > > > > > > M. > > > > > > > > > > > Hi, > > > > Where do I set the DHCP configurations? Is it by running the setup > > command > > > > form the text console? if so, I have tried to use a static IP as well, > > but > > > > the only thing that happened was that I got the entered IP address on > > eth0 > > > > but no access to the network. > > > > Best regards and thanks, > > > > Christian > > > > > > > > > > > > ----- Original Message ----- > > > > From: "Marian Selea" < mselea@xxxxxxxxx > > > > > To: < blinux-list@xxxxxxxxxx > > > > > Sent: Tuesday, February 03, 2004 2:59 PM > > > > Subject: Re: Networking in Fedora > > > > > > > > > > > > > An interface up-up is supposed to fwd traffic, or at least to `see' > > its > > > > keepalives. If no ip address is got via dhcp, I'm afraid that the config > > of > > > > the dhcp is quite unsync'ed. Try to check out if the dhcp is correctly > > set > > > > up and give it a try again.... > > > > > > > > > > Hope it helps, > > > > > M. > > > > > > > > > > > > > > > > > Hi, > > > > > > Yes, the device is up and running fine. I have also typed ifconfig > > eth0 > > > > and > > > > > > that showed me the device as well, but no IP-address. DHCP should > > work > > > > fine > > > > > > since I have a Windows XP system on the same machine and it works > > fine. > > > > > > Best regards, > > > > > > Christian > > > > > > > > > > > > > > > > > > ----- Original Message ----- > > > > > > From: < willem@xxxxxxxxxxxxxxxxx > > > > > > > To: < blinux-list@xxxxxxxxxx > > > > > > > Sent: Tuesday, February 03, 2004 7:58 AM > > > > > > Subject: Re: Networking in Fedora > > > > > > > > > > > > > > > > > > > Hi, > > > > > > > Try mii-tool eth0 > > > > > > > That should show you if the physical link is up. > > > > > > > > > > > > > > On Tue, 3 Feb 2004, Christian Moller wrote: > > > > > > > > > > > > > > > Hi again, > > > > > > > > I have problems with my networking in Fedora. My 3COM-card has > > > > worked > > > > > > fine > > > > > > > > in other Linux releases so that shouldn't be a problem. I > > enabled > > > > DHCP > > > > > > > > during the installating and I have now found that the > > eth0-device > > > > has no > > > > > > > > IP-address. Any ideas? > > > > > > > > Thanks, > > > > > > > > Christian > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > > > Blinux-list@xxxxxxxxxx > > > > > > > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > > > Blinux-list@xxxxxxxxxx > > > > > > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > > > Blinux-list@xxxxxxxxxx > > > > > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > > > Blinux-list@xxxxxxxxxx > > > > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > > > Blinux-list@xxxxxxxxxx > > > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > > > > _______________________________________________ > > > > > > Blinux-list@xxxxxxxxxx > > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > > > > > > > > _______________________________________________ > > > > Blinux-list@xxxxxxxxxx > > https://www.redhat.com/mailman/listinfo/blinux-list > > > > > _______________________________________________ > > Blinux-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/blinux-list > _______________________________________________ Blinux-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/blinux-list