Below is the meassage from oralux. TOm Selon Tom Masterson < kd7cyu@xxxxxxxxx>: Yes you can use Oralux with only a braille display. As mentionned in the Knoppix cheatcode you must enter the name of your braille display at boot time. so for example if you have a powerbraille you will enter brltty=ts or if you have an Alva you will enter brltty=al. I don't have the list of all the supported braille display and their code name but you can find this list in the brltty documentation. If you don't have brltty installed in another machine now tell me and I'll search the list and send it to you. Best regards, -- Nath > WHile I see mention of included braille drivers I don't see anything that > says whether oralux works out-of-the-box with a braille display. So here is > the question. If I have no speech synthesys available (except a sound card) > but do have a braille display attached to the computer can I use oarlux? > > Tom Masterson ----- Original Message ----- From: "Cheryl Homiak" <chomiak@xxxxxxxxxxxxx> To: <blinux-list@xxxxxxxxxx> Sent: Monday, June 23, 2003 14:49 Subject: Re: Oralux: braille or not? > Thanks Tom. > If I get a cd burned and try it, I'll put the cheatcodes in and let you know > what happens. > > Cheryl > > > _______________________________________________ > > Blinux-list@xxxxxxxxxx > https://www.redhat.com/mailman/listinfo/blinux-list > _______________________________________________ Blinux-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/blinux-list