Ok, my cable modem connection seems to be working fine as far as it goes;
I am including here what I get when I enter "pump -i eth0 --status" since
the output is relatively short. I was a bit concerned about whether the
lines that have 0.0.0.0 for next server were normal or not.
My biggest problem now is that I can't figure out how to get this to
happen at boot time. Once I boot, I have to type "pump -i eth0" each time
to start it. I've looked at the man page several times and still can't
find anything that indicates how this is to be accomplished.
pump.txt
Device eth0
IP: 24.196.69.124
Netmask: 255.255.255.0
Broadcast: 255.255.255.255
Network: 24.196.69.0
Boot server 12.24.207.53
Next server 0.0.0.0
Gateway: 24.196.69.1
Domain: mad.chartermi.net
Nameservers: 24.196.64.39 24.196.64.40
Renewal time: Wed Oct 31 14:41:52 2001
Expiration time: Wed Oct 31 16:11:52 2001
Cheryl