Hi Murali !
Congratulations to your port. Well done.
Likely the u-boot needs to be adapted to load the right kernel and use the right root partition.
Can you send us the log from u-boot and the output of
$> printenv
in u-boot.
Best,
Jan-Simon
Best regards,
Jan-Simon
------
Jan-Simon Möller
AGL Release Manager
The Linux Foundation
Visit us at:
www.automotivegradelinux.org
lists.automotivelinux.org
www.linuxfoundation.org
Jan-Simon
------
Jan-Simon Möller
AGL Release Manager
The Linux Foundation
Visit us at:
www.automotivegradelinux.org
lists.automotivelinux.org
www.linuxfoundation.org
On Tue, Apr 18, 2023 at 1:31 PM Murali Krishna <mkn20679@xxxxxxxxx> wrote:
Hi Team AGL,Greetings of the day,i have AGL Image for My Target Machine i.e.,Kontron Smarc-Samx6i.My Target Machine U-Boot runs directly from the internal Flash.So my target board is powered on or reset, it proceeds to boot the U-Boot firmware from the internal Flash.So here my question is how can I boot my target board with AGL Image( i tried to copy the image into sd card and insert it into the target machine but the board is not booting).Here I am going to add AGL Image and necessary data as a picture.you may also Verify the files and suggest to me if anything is missing during the build process.Thanks and RegardsMurali
_._,_._,_
Links:
You receive all messages sent to this group.
View/Reply Online (#10517) |
Reply To Group
| Reply To Sender
|
Mute This Topic
| New Topic
Your Subscription |
Contact Group Owner |
Unsubscribe
[list-automotive-discussions82@xxxxxxxxxxx]
_._,_._,_
