Hi everyone, I would share the new error happening today, in the following message I attach the log dumped from the journal.
------------[ cut here ]------------
[ 848.113242] WARNING: CPU: 0 PID: 9 at net/core/skbuff.c:651 skb_release_head_state+0xb8/0xc8
[ 848.121670] Modules linked in: cdc_acm rfcomm 8021q garp stp mrp llc bnep can_bcm can nfc wl18xx wlcore mac80211 libarc4 cfg80211 wlcore_sdio crct10dif_ce rcar_can btwilink can_dev lsm9ds0 bluetooth industrialio_triggered_buffer ecdh_generic ecc st_drv rfkill vsp2(O) vspm(O) uio_pdrv_genirq sllin(O) pvrsrvkm(O) hdm_usb(O) hdm_i2c(O) hdm_dim2(O) aim_v4l2(O) aim_sound(O) aim_network(O) aim_cdev(O) mostcore(O) ipv6
[ 848.158163] CPU: 0 PID: 9 Comm: ksoftirqd/0 Tainted: G W O 5.4.72-yocto-standard #1
[ 848.166938] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
[ 848.174933] pstate: 00000085 (nzcv daIf -PAN -UAO)
[ 848.179717] pc : skb_release_head_state+0xb8/0xc8
[ 848.184413] lr : skb_release_all+0x14/0x30
[ 848.188501] sp : ffff800010003c80
[ 848.191807] x29: ffff800010003c80 x28: ffff000735cfee00
[ 848.197112] x27: ffff800011417018 x26: ffff000735690000
[ 848.202416] x25: ffff800011417018 x24: ffff800010003d90
[ 848.207720] x23: 0000000000000080 x22: ffff00073eed6f0c
[ 848.213024] x21: ffff800010c08360 x20: ffff0006d6a66900
[ 848.218329] x19: ffff0006d6a66900 x18: 000000000000000e
[ 848.223633] x17: 0000000000000001 x16: 0000000000000019
[ 848.228937] x15: 0000000000000033 x14: 000000000000004c
[ 848.234241] x13: 0000000000000068 x12: ffff800010e6a9f8
[ 848.239546] x11: ffff00073eed47b0 x10: 0000000000000000
[ 848.244850] x9 : ffff800011697e40 x8 : ffff800011697e38
[ 848.250155] x7 : 0000000040042000 x6 : 000000013047b4ef
[ 848.255459] x5 : 00ffffffffffffff x4 : 0000000000000000
[ 848.260763] x3 : ffff00073eed6f0c x2 : 0000000000000000
[ 848.266067] x1 : ffff800010be9eb0 x0 : 0000000000010101
[ 848.271371] Call trace:
[ 848.273811] skb_release_head_state+0xb8/0xc8
[ 848.278160] skb_release_all+0x14/0x30
[ 848.281902] kfree_skb+0x38/0x110
[ 848.285210] enqueue_to_backlog+0xc0/0x248
[ 848.289299] netif_rx_internal+0x60/0x1f0
[ 848.293301] netif_rx+0x1c/0x170
[ 848.296525] can_get_echo_skb+0x30/0x60 [can_dev]
[ 848.301223] rcar_can_interrupt+0xc0/0x738 [rcar_can]
[ 848.306266] __handle_irq_event_percpu+0x70/0x2b8
[ 848.310963] handle_irq_event_percpu+0x30/0x88
[ 848.315398] handle_irq_event+0x44/0xe0
[ 848.319227] handle_fasteoi_irq+0xb4/0x160
[ 848.323315] generic_handle_irq+0x24/0x38
[ 848.327317] __handle_domain_irq+0x60/0xb8
[ 848.331405] gic_handle_irq+0x50/0xa8
[ 848.335060] el1_irq+0xb8/0x180
[ 848.338196] can_rcv_filter+0x100/0x1d8 [can]
[ 848.342546] can_receive+0xa4/0xf8 [can]
[ 848.346462] can_rcv+0x3c/0x98 [can]
[ 848.350031] __netif_receive_skb_one_core+0x50/0x78
[ 848.354901] __netif_receive_skb+0x14/0x60
[ 848.358989] process_backlog+0xbc/0x190
[ 848.362818] net_rx_action+0x11c/0x410
[ 848.366559] __do_softirq+0x130/0x3c4
[ 848.370214] run_ksoftirqd+0x3c/0x50
[ 848.373782] smpboot_thread_fn+0x1e4/0x2a8
[ 848.377871] kthread+0x138/0x158
[ 848.381092] ret_from_fork+0x10/0x1c
[ 848.384659] ---[ end trace 3fb456a691bdb64a ]---
[ 848.389285] ------------[ cut here ]------------
[ 848.393897] WARNING: CPU: 0 PID: 9 at net/core/skbuff.c:651 skb_release_head_state+0xb8/0xc8
[ 848.402324] Modules linked in: cdc_acm rfcomm 8021q garp stp mrp llc bnep can_bcm can nfc wl18xx wlcore mac80211 libarc4 cfg80211 wlcore_sdio crct10dif_ce rcar_can btwilink can_dev lsm9ds0 bluetooth industrialio_triggered_buffer ecdh_generic ecc st_drv rfkill vsp2(O) vspm(O) uio_pdrv_genirq sllin(O) pvrsrvkm(O) hdm_usb(O) hdm_i2c(O) hdm_dim2(O) aim_v4l2(O) aim_sound(O) aim_network(O) aim_cdev(O) mostcore(O) ipv6
[ 848.438817] CPU: 0 PID: 9 Comm: ksoftirqd/0 Tainted: G W O 5.4.72-yocto-standard #1
[ 848.447592] Hardware name: Renesas H3ULCB Kingfisher board based on r8a7795 ES2.0+ (DT)
[ 848.455587] pstate: 00000085 (nzcv daIf -PAN -UAO)
[ 848.460371] pc �[ 0.000157] NOTICE: BL2: R-Car Gen3 Initial Program Loader(CA57) Rev.1.0.21
[ 0.005719] NOTICE: BL2: PRR is R-Car H3 Ver.3.0
[ 0.010384] NOTICE: BL2: Board is Starter Kit Rev.---
[ 0.015503] NOTICE: BL2: Boot device is HyperFlash(80MHz)
[ 0.020930] NOTICE: BL2: LCM state is CM
[ 0.024969] NOTICE: BL2: AVS setting succeeded. DVFS_SetVID=0x53
[ 0.030944] NOTICE: BL2: CH0: 0x400000000 - 0x480000000, 2 GiB
[ 0.036806] NOTICE: BL2: CH1: 0x500000000 - 0x580000000, 2 GiB
[ 0.042681] NOTICE: BL2: CH2: 0x600000000 - 0x680000000, 2 GiB
[ 0.048556] NOTICE: BL2: CH3: 0x700000000 - 0x780000000, 2 GiB
[ 0.054445] NOTICE: BL2: DDR3200(rev.0.33)NOTICE: [COLD_BOOT]NOTICE: ..0
[ 0.100063] NOTICE: BL2: DRAM Split is 4ch(DDR f)
[ 0.104551] NOTICE: BL2: QoS is default setting(rev.0.07)
[ 0.109995] NOTICE: BL2: DRAM refresh interval 1.95 usec
[ 0.115412] NOTICE: BL2: Lossy Decomp areas
[ 0.119585] NOTICE: Entry 0: DCMPAREACRAx:0x80000540 DCMPAREACRBx:0x570
[ 0.126670] NOTICE: Entry 1: DCMPAREACRAx:0x40000000 DCMPAREACRBx:0x0
[ 0.133582] NOTICE: Entry 2: DCMPAREACRAx:0x20000000 DCMPAREACRBx:0x0
[ 0.140497] NOTICE: BL2: v1.4(release):15dba6b
[ 0.144987] NOTICE: BL2: Built : 05:32:00, Sep 3 2018
[ 0.150174] NOTICE: BL2: Normal boot
[ 0.153820] NOTICE: BL2: dst=0xe6323d00 src="" len=512(0x200)
[ 0.160203] NOTICE: BL2: dst=0x43f00000 src="" len=6144(0x1800)
[ 0.166823] NOTICE: BL2: dst=0x44000000 src="" len=65536(0x10000)
[ 0.174054] NOTICE: BL2: dst=0x44100000 src="" len=1048576(0x100000)
[ 0.188876] NOTICE: BL2: dst=0x50000000 src="" len=1048576(0x100000)
_._,_._,_
Links:
You receive all messages sent to this group.
View/Reply Online (#9624) | Reply To Group | Reply To Sender | Mute This Topic | New Topic
Mute #renesas
Your Subscription | Contact Group Owner | Unsubscribe [list-automotive-discussions82@xxxxxxxxxxx]
_._,_._,_
