Re: BSP 5.5 and dtb changes

["Harunobu Kurokawa" <harunobu.kurokawa.dn@xxxxxxxxxxx>]

Hi Jan-simon.

"Officially", I would say that we recommend to you need to use by proper combination u-boot and BSP version.


Best regards,
Kurokawa

> -----Original Message-----
> From: agl-dev-community@xxxxxxxxxxxxxxxxxxxxxxxxx <agl-dev-community@xxxxxxxxxxxxxxxxxxxxxxxxx> On Behalf Of
> Scott Murray via lists.automotivelinux.org
> Sent: Thursday, October 14, 2021 2:48 AM
> To: agl-dev-community@xxxxxxxxxxxxxxxxxxxxxxxxx
> Cc: Jan-Simon Moeller <jsmoeller@xxxxxxxxxxxxxxxxxxx>
> Subject: Re:  BSP 5.5 and dtb changes
> 
> On Wed, 13 Oct 2021, Stephane Desneux wrote:
> 
> > Yes, LGTM if your M3 boards are v1 or v2 .
> >
> > To summarize:
> > * r8a77951 is for H3
> > * r8a77960 is for M3 v1/v2
> > * r8a77961 is for M3 v3
> >
> > And I also expect the new uboot to be able to load "old" kernel/dtb
> > configs (LL). But that's a good point: this needs some testing. Ronan
> > will report his findings ASAP on this topic.
> 
> At least on the reference hardware I had no issue with booting the new kernel with the old firmware + U-Boot and the old
> kernel with the new firmware + U-Boot after doing an upgrade, so long as the dtb name is set appropriately.
> 
> Scott
> 
> 
> 
> 
> 



-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#9462): https://lists.automotivelinux.org/g/agl-dev-community/message/9462
Mute This Topic: https://lists.automotivelinux.org/mt/86284701/2167316
Group Owner: agl-dev-community+owner@xxxxxxxxxxxxxxxxxxxxxxxxx
Unsubscribe: https://lists.automotivelinux.org/g/agl-dev-community/leave/4543822/2167316/883735764/xyzzy [list-automotive-discussions82@xxxxxxxxxxx]
-=-=-=-=-=-=-=-=-=-=-=-