Re: Not able build telematics for Raspberry Pi3

["Scott Murray" <scott.murray@xxxxxxxxxxxx>]

On Sun, 8 Nov 2020, RAKESH wrote:

> Hi Scott,
>
> Thank  you  providing the information.
> actually to understand the socketcan i tried setting up  vcan in linux using the below commands i am able to send and receive CAN data.
> Setup the vcan
> sudo modprobe vcan sudo ip link add dev vcan0 type vcan
> sudo ip link set up can0
>
> In one terminal CAN data sent
> cansend can0 123#1122334455667788
> In another terminal CAN data received
> candump can0
>
> I guess we also need to install can-utils for this.
> But in AGL-telematics sudo is disabled! cannot install anything
> How can we create server and client since i cant create two terminal there?
> How can we enable telematics recorder and send the data to it?
> What is the necessary things to be taken care while building telematics image?
> i tried creating
> chsmack -a _ /etc/xdg/telematics-recorder.conf
> but i dont know later steps.
>
> Please help me out for the detailed steps to make telematic demo recorder takes the data.

Rakesh,

I'll work up some changes to be able to build and run the
agl-telematics-demo-platform image without CAN hardware in the next day or
two and get back to you with some steps for running the demo.

Scott


-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#8829): https://lists.automotivelinux.org/g/agl-dev-community/message/8829
Mute This Topic: https://lists.automotivelinux.org/mt/77834383/2167316
Group Owner: agl-dev-community+owner@xxxxxxxxxxxxxxxxxxxxxxxxx
Unsubscribe: https://lists.automotivelinux.org/g/agl-dev-community/leave/4543822/883735764/xyzzy [list-automotive-discussions82@xxxxxxxxxxx]
-=-=-=-=-=-=-=-=-=-=-=-