Re: AGL eel 5.0.3 R-Car H3 Starter kit BSP question

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 

Hi,

 

I am on the way to execute AGL eel 5.0.3 on R-Car H3 Ver 2.0 Starter kit by referring below document.

 

http://docs.automotivelinux.org/docs/getting_started/en/dev/reference/machines/R-Car-Starter-Kit-gen3.html

 

In the middle of the document, it says below.

      • For machine h3ulcb (BSP >= 2.19):
    • setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-es1-h3ulcb.dtb
      • For machine h3ulcb (BSP < 2.19):
    • setenv load_dtb ext4load mmc 0:1 0x48000000 /boot/Image-r8a7795-h3ulcb.dtb

 

 

Question) How can I know BSP version?

     I tried “Image-r8a7795-es1-h3ulcb.dtb”, it does not work on R-Car H3 Ver2.0 Starter Kit.

     If I use “Image-r8a7795-h3ulcb.dtb”, it works.

     Therefore I am guessing my BSP version is less than 2.19, I am not sure and would like to know how to confirm the BSP version.

 

 

Best Regards,

_______________________________________________
automotive-discussions mailing list
automotive-discussions@xxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/automotive-discussions
[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux