Re: Regression after changes for mounts from IPv6 addresses introducing delays

[Mike Gabriel <sunweaver@xxxxxxxxxx>]

On  Mi 12 Jul 2023 04:09:18 CEST, Ian Kent wrote:

> On 11/7/23 15:32, Salvatore Bonaccorso wrote:
> > Hi Mike,
> >
> > On Tue, Jul 11, 2023 at 06:06:20AM +0000, Mike Gabriel wrote:
> > > Hi all,
> > >
> > > On  Di 11 Jul 2023 07:27:48 CEST, Salvatore Bonaccorso wrote:
> > >
> > > > Hi Ian,
> > > >
> > > > On Tue, Jul 11, 2023 at 01:13:06PM +0800, Ian Kent wrote:
> > > > > On 11/7/23 08:30, Ian Kent wrote:
> > > > > > On 10/7/23 20:42, Salvatore Bonaccorso wrote:
> > > > > > > Hi Ian,
> > > > > > >
> > > > > > > On Mon, Jul 10, 2023 at 07:11:09PM +0800, Ian Kent wrote:
> > > > > > > > On 10/7/23 18:29, Salvatore Bonaccorso wrote:
> > > > > > > > > Hi,
> > > > > > > > >
> > > > > > > > > On Mon, Jul 10, 2023 at 04:33:24PM +0800, Ian Kent wrote:
> > > > > > > > > > On 10/7/23 14:24, Salvatore Bonaccorso wrote:
> > > > > > > > > > > Hi Ian,
> > > > > > > > > > >
> > > > > > > > > > > On Mon, Jul 10, 2023 at 10:05:12AM +0800, Ian Kent wrote:
> > > > > > > > > > > > On 9/7/23 22:57, Salvatore Bonaccorso wrote:
> > > > > > > > > > > > > Hi
> > > > > > > > > > > > >
> > > > > > > > > > > > > The following sort of regression was noticed
> > > > > > > > > > > > > while updating a client
> > > > > > > > > > > > > running Debian buster (with autofs 5.1.2 based) to
> > > > > Debian bullseye
> > > > > > > > > > > > > (5.1.7 based autofs), but verified it's
> > > > > > > > > > > > > still present with 5.1.8. The
> > > > > > > > > > > > > folloing setup is present:
> > > > > > > > > > > > >
> > > > > > > > > > > > > There is a NFS server, dualstacked, with both public
> > > > > IPv4 and IPv6
> > > > > > > > > > > > > addresses resolvable in DNS. As I cannot put
> > > > > > > > > > > > > the public IPs here in
> > > > > > > > > > > > > the report, let's assume It is called nfs-server
> > > > > with addresses
> > > > > > > > > > > > > 192.168.122.188 and fc00:192:168:122::188.
> > > > > > > > > > > > >
> > > > > > > > > > > > > The client initially running Debian buster,
> > > > > > > > > > > > > is not dualstacked, has
> > > > > > > > > > > > > only IPv4 and has correct routing, e.g.
> > > > > > > > > > > > > pinging to nfs-server will as
> > > > > > > > > > > > > well go to the IPv4 address of nfs-server,
> > > > > > > > > > > > > or any tcp connection will
> > > > > > > > > > > > > go to IPv4 (e.g. ssh -vvv nfs-server).
> > > > > > > > > > > > >
> > > > > > > > > > > > > Automount configuration is fairly simple:
> > > > > > > > > > > > >
> > > > > > > > > > > > > auto.master:
> > > > > > > > > > > > > [...]
> > > > > > > > > > > > > /home            /etc/auto/homes01
> > > > > > > > > > > > > [...]
> > > > > > > > > > > > >
> > > > > > > > > > > > > and /etc/auto/homes01
> > > > > > > > > > > > > [...]
> > > > > > > > > > > > > * nfs-server:/srv/homes/homes01/&
> > > > > > > > > > > > > [...]
> > > > > > > > > > > > >
> > > > > > > > > > > > > (note in fact the real configuration is slightly
> > > > > more complex,
> > > > > > > > > > > > > nosuid,rw,hard,proto=tcp as options, but
> > > > > > > > > > > > > veried as wel stripping down the
> > > > > > > > > > > > > options, even dropping proto=tcp). I hope I
> > > > > > > > > > > > > correctly de-anonymized
> > > > > > > > > > > > > not messing up with paths in the logs below.
> > > > > > > > > > > > >
> > > > > > > > > > > > > After the update to autofs 5.1.7 based
> > > > > > > > > > > > > version there is a 10s delay on
> > > > > > > > > > > > > mounts from the servers.
> > > > > > > > > > > > >
> > > > > > > > > > > > > In the following logs I had to slightly
> > > > > > > > > > > > > deanonymize the names. But I
> > > > > > > > > > > > > think the delay problem is seen enough by the timestamps.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Before the update, with autofs 5.1.2:
> > > > > > > > > > > > >
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > handle_packet: type = 3
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > handle_packet_missing_indirect: token 26,
> > > > > > > > > > > > > name username, request pid 5285
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > attempting to mount entry /home/username
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > lookup_mount: lookup(program): username ->
> > > > > > > > > > > > > -nosuid,rw,hard,proto=tcp
> > > > > > > > > > > > > nfs-server:/srv/homes/homes01/username
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > parse_mount: parse(sun): expanded entry:
> > > > > > > > > > > > > -nosuid,rw,hard,proto=tcp
> > > > > > > > > > > > > nfs-server:/srv/homes/homes01/username
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > parse_mount: parse(sun): gathered options:
> > > > > > > > > > > > > nosuid,rw,hard,proto=tcp
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > parse_mount: parse(sun):
> > > > > > > > > > > > > dequote("nfs-server:/srv/homes/homes01/username")
> > > > > > > > > > > > > -> nfs-server:/srv/homes/homes01/username
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > parse_mount: parse(sun): core of entry:
> > > > > > > > > > > > > options=nosuid,rw,hard,proto=tcp,
> > > > > > > > > > > > > loc=nfs-server:/srv/homes/homes01/username
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > sun_mount: parse(sun): mounting root /home,
> > > > > > > > > > > > > mountpoint username, what
> > > > > > > > > > > > > nfs-server:/srv/homes/homes01/username,
> > > > > > > > > > > > > fstype nfs, options nosuid,rw,hard,proto=tcp
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > mount_mount: mount(nfs): root=/home
> > > > > > > > > > > > > name=username
> > > > > > > > > > > > > what=nfs-server:/srv/homes/homes01/username,
> > > > > > > > > > > > > fstype=nfs, options=nosuid,rw,hard,proto=tcp
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > mount_mount: mount(nfs): nfs
> > > > > > > > > > > > > options="nosuid,rw,hard,proto=tcp",
> > > > > > > > > > > > > nobind=0, nosymlink=0, ro=0
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > get_nfs_info: called with host
> > > > > > > > > > > > > nfs-server(192.168.122.188) proto 6 version
> > > > > > > > > > > > > 0x30
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > get_nfs_info: nfs v3 rpc ping time: 0.000000
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > get_nfs_info: host nfs-server cost 0 weight
> > > > > > > > > > > > >
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > prune_host_list: selected subset of hosts
> > > > > > > > > > > > > that support NFS3 over TCP
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > mount_mount: mount(nfs): calling mkdir_path
> > > > > > > > > > > > > /home/username
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > mount_mount: mount(nfs): calling mount -t
> > > > > > > > > > > > > nfs -s -o nosuid,rw,hard,proto=tcp
> > > > > > > > > > > > > nfs-server:/srv/homes/homes01/username
> > > > > > > > > > > > > /home/username
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > mount_mount: mount(nfs): mounted
> > > > > > > > > > > > > nfs-server:/srv/homes/homes01/username on
> > > > > > > > > > > > > /home/username
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]:
> > > > > > > > > > > > > dev_ioctl_send_ready: token = 26
> > > > > > > > > > > > > Jul 09 11:54:41 clienthost automount[5143]: mounted
> > > > > /home/username
> > > > > > > > > > > > > After the update to 5.1.7 (or 5.1.8):
> > > > > > > > > > > > >
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > handle_packet: type = 3
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > handle_packet_missing_indirect: token 33,
> > > > > > > > > > > > > name username, request pid 7104
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > attempting to mount entry /home/username
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > lookup_mount: lookup(program): username ->
> > > > > > > > > > > > > -nosuid,rw,hard,proto=tcp
> > > > > > > > > > > > > nfs-server:/srv/homes/homes01/username
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > parse_mount: parse(sun): expanded entry:
> > > > > > > > > > > > > -nosuid,rw,hard,proto=tcp
> > > > > > > > > > > > > nfs-server:/srv/homes/homes01/username
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > parse_mount: parse(sun): gathered options:
> > > > > > > > > > > > > nosuid,rw,hard,proto=tcp
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > parse_mount: parse(sun):
> > > > > > > > > > > > > dequote("nfs-server:/srv/homes/homes01/username")
> > > > > > > > > > > > > -> nfs-server:/srv/homes/homes01/username
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > parse_mount: parse(sun): core of entry:
> > > > > > > > > > > > > options=nosuid,rw,hard,proto=tcp,
> > > > > > > > > > > > > loc=nfs-server:/srv/homes/homes01/username
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > sun_mount: parse(sun): mounting root /home,
> > > > > > > > > > > > > mountpoint username, what
> > > > > > > > > > > > > nfs-server:/srv/homes/homes01/username,
> > > > > > > > > > > > > fstype nfs, options nosuid,rw,hard,proto=tcp
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > mount(nfs): root=/home name=username
> > > > > > > > > > > > > what=nfs-server:/srv/homes/homes01/username,
> > > > > > > > > > > > > fstype=nfs, options=nosuid,rw,hard,proto=tcp
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > mount(nfs): nfs
> > > > > > > > > > > > > options="nosuid,rw,hard,proto=tcp",
> > > > > > > > > > > > > nobind=0, nosymlink=0, ro=0
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > get_nfs_info: called with host
> > > > > > > > > > > > > nfs-server(192.168.122.188) proto 6 version
> > > > > > > > > > > > > 0x20
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > get_nfs_info: nfs v3 rpc ping time: 0.000184
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > get_nfs_info: host nfs-server cost 183
> > > > > > > > > > > > > weight 0
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > prune_host_list: selected subset of hosts
> > > > > > > > > > > > > that support NFS3 over TCP
> > > > > > > > > > > > > Jul 09 11:56:23 clienthost automount[6952]:
> > > > > > > > > > > > > get_supported_ver_and_cost: called with host
> > > > > > > > > > > > > nfs-server(fc00:192:168:122::188) version
> > > > > > > > > > > > > 0x20
> > > > > > > > > > > > > Jul 09 11:56:33 clienthost automount[6952]:
> > > > > > > > > > > > > get_supported_ver_and_cost: rpc ping time
> > > > > > > > > > > > > 0.000352
> > > > > > > > > > > > > Jul 09 11:56:33 clienthost automount[6952]:
> > > > > > > > > > > > > get_supported_ver_and_cost: cost 352 weight
> > > > > > > > > > > > >
> > > > > > > > > > > > > Jul 09 11:56:33 clienthost automount[6952]:
> > > > > > > > > > > > > mount_mount: mount(nfs): calling mkdir_path
> > > > > > > > > > > > > /home/username
> > > > > > > > > > > > > Jul 09 11:56:33 clienthost automount[6952]:
> > > > > > > > > > > > > mount(nfs): calling mount -t nfs -s -o
> > > > > > > > > > > > > nosuid,rw,hard,proto=tcp
> > > > > > > > > > > > > nfs-server:/srv/homes/homes01/username
> > > > > > > > > > > > > /home/username
> > > > > > > > > > > > > Jul 09 11:56:33 clienthost automount[6952]:
> > > > > > > > > > > > > mount_mount: mount(nfs): mounted
> > > > > > > > > > > > > nfs-server:/srv/homes/homes01/username on
> > > > > > > > > > > > > /home/username
> > > > > > > > > > > > > Jul 09 11:56:33 clienthost automount[6952]:
> > > > > > > > > > > > > dev_ioctl_send_ready: token = 33
> > > > > > > > > > > > > Jul 09 11:56:33 clienthost automount[6952]: mounted
> > > > > /home/username
> > > > > > > > > > > > > while first get_nfs_info is called again with host
> > > > > > > > > > > > > nfs-server(192.168.12.2188), there is a
> > > > > get_supported_ver_and_cost
> > > > > > > > > > > > > with the IPv6 address, hanging for 10s.
> > > > > > > > > > > > The later call timed out, it's timeout is 10 seconds
> > > > > for addresses
> > > > > > > > > > > > that look like they are on the local network so the
> > > > > IPv6 address is
> > > > > > > > > > > > not responding.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > I know that 10 seconds is a bit long for interactive
> > > > > use, perhaps
> > > > > > > > > > > > it should be a bit less, but it's better than the 2 minutes we
> > > > > > > > > > > >
> > > > > > > > > > > > would often see ...
> > > > > > > > > > > Yes fully understand. We got complaints from clients
> > > > > having to wait
> > > > > > > > > > > 10s for their homes to be mounted, this is how we
> > > > > > > > > > > start investigating
> > > > > > > > > > > it.
> > > > > > > > > > >
> > > > > > > > > > > > I guess you are saying it should be responding ... not
> > > > > sure what
> > > > > > > > > > > > I can do about that, I will need to reproduce the
> > > > > problem and IPv6
> > > > > > > > > > > > is still not something I have a setup for easily available.
> > > > > > > > > > > I'm not sure. I was actually surprised, given the
> > > > > > > > > > > Client is IPv4 only
> > > > > > > > > > > networking, that there was happing with the updated
> > > > > autofs actually
> > > > > > > > > > > a call to the IPv6 address.
> > > > > > > > > > >
> > > > > > > > > > > > > If I just revert c578e5b37c3c ("autofs-5.1.5
> > > > > > > > > > > > > - Fix NFS mount from IPv6
> > > > > > > > > > > > > addresses") then the mount is again quick, but logs
> > > > > an additional
> > > > > > > > > > > > > Jul 09 16:31:34 clienthost automount[12045]:
> > > > > > > > > > > > > check_address_proto: requested protocol does
> > > > > > > > > > > > > not match address
> > > > > > > > > > > > >
> > > > > > > > > > > > > so likely not the right fix.
> > > > > > > > > > > > That does raise some interesting alternatives though.
> > > > > > > > > > > >
> > > > > > > > > > > > I'm not sure what the function
> > > > > > > > > > > > check_address_proto() is seeing but it
> > > > > > > > > > > >
> > > > > > > > > > > > essentially (in 5.1.8) says "if the rpc request is for
> > > > > IPv6 and the
> > > > > > > > > > > > host address length is not set to the length of
> > > > > > > > > > > > an IPv6 address bail
> > > > > > > > > > > >
> > > > > > > > > > > > out". So whatever is wrong there is probably still
> > > > > wrong just not
> > > > > > > > > > > > happening due to the check returning a fail.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > If I can setup an environment I can check that
> > > > > > > > > > > > out further but sounds
> > > > > > > > > > > >
> > > > > > > > > > > > a bit suspicious. I can of course check the code
> > > > > > > > > > > > to see if there's an
> > > > > > > > > > > >
> > > > > > > > > > > > obvious setup mistake ...
> > > > > > > > > > > If I can provide any help in debugging this or you can
> > > > > give me hints
> > > > > > > > > > > what I can try let me know. I will need to release the
> > > > > client host
> > > > > > > > > > > soonish again to the customers, but will try to make a
> > > > > similar test
> > > > > > > > > > > client available for further testing.
> > > > > > > > > > >
> > > > > > > > > > > > > I suspect mounts from server, which are
> > > > > > > > > > > > > dualstacked, but route to them
> > > > > > > > > > > > > is only IPv4, are not correctly handled after 90532146bc0e
> > > > > > > > > > > > > ("autofs-5.1.3 - fix ipv6 proto option handling")
> > > > > and c578e5b37c3c
> > > > > > > > > > > > > ("autofs-5.1.5 - Fix NFS mount from IPv6 addresses").
> > > > > > > > > > > > I'm not sure that these changes affect the routing at
> > > > > all, at least
> > > > > > > > > > > > not due to autofs itself and the above is a proto TCP
> > > > > request so it
> > > > > > > > > > > > shouldn't be the server simply not responding ... not
> > > > > sure why it's
> > > > > > > > > > > > happening.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > The difference between the first and second log traces
> > > > > looks like
> > > > > > > > > > > > dns lookup has returned two hosts in the second
> > > > > availability ping,
> > > > > > > > > > > > an IPv4 and an IPv6 address. Not sure why an IPv6
> > > > > address isn't
> > > > > > > > > > > > present in the first availability ping.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > It might also be that NFSv3 is being checked for
> > > > > > > > > > > > availability rather
> > > > > > > > > > > >
> > > > > > > > > > > > than IPv4. I've assumed that NFS v3 works over IPv6 ...
> > > > > > > > > > > About NFsv3: This is actually independent, it is the
> > > > > same if I use
> > > > > > > > > > > NFSv4 (with -vers=4 option, which we have in the
> > > > > original setup, I
> > > > > > > > > > > just tried to strip down as many options as possible for the
> > > > > > > > > > > reproducing case, though still not minimal, but we
> > > > > > > > > > > can actually ommint
> > > > > > > > > > > any of the options).
> > > > > > > > > > >
> > > > > > > > > > > > > (note the package in Debian *is* built with
> > > > > --with-libtirpc).
> > > > > > > > > > > > > Does any of the above make sense?
> > > > > > > > > > > > Sadly it does make sense but, as I say, I don't know
> > > > > what's causing
> > > > > > > > > > > > it.
> > > > > > > > > > > Ok. Again I'm eager to help as much as possible to
> > > > > > > > > > > pinpoint the issue,
> > > > > > > > > > > but might need some hints what I should/can try to isolate the
> > > > > > > > > > > problem. Are there potential missconficuration on client
> > > > > side which
> > > > > > > > > > > cause us problem for autofs in this setup?
> > > > > > > > > > This sounds a bit strange because above you mentioned the
> > > > > environment
> > > > > > > > > > is IPv4 so the curious thing is where is that IPv6
> > > > > > > > > > address even coming
> > > > > > > > > >
> > > > > > > > > > from. Those addresses are coming from glibc so it's DNS
> > > > > > > > > > or a hosts file.
> > > > > > > > > The environment is equipped to be able to do dual stack, and in fact
> > > > > > > > > the nfs-server has both IPv4 and IPv6.
> > > > > > > > >
> > > > > > > > > The particular client is though only equipped with IPv4 address.
> > > > > > > > >
> > > > > > > > > For the nfs-server both IPv4 and IPv6 addresses are both in
> > > > > DNS and as
> > > > > > > > > well locally on every hosts in /etc/hosts file deployed via
> > > > > > > > > configuration managment.
> > > > > > > > >
> > > > > > > > > So both resolvable even from the client, but the client reaches the
> > > > > > > > > server only via IPv4.
> > > > > > > > I was able to use a real IPv6 address and the ping works just fine.
> > > > > > > >
> > > > > > > >
> > > > > > > > So it seems that the bug is actually that I try an IPv6 address at
> > > > > > > >
> > > > > > > > all on an IPv4 only node.
> > > > > > > >
> > > > > > > >
> > > > > > > > It would be useful to know if there's an IPv6 address assigned to
> > > > > > > >
> > > > > > > > the network interface on the customer machine (even if it's the
> > > > > > > >
> > > > > > > > link-local address) so I know what to expect. You would think that
> > > > > > > >
> > > > > > > > trying to send an IPv6 packet on an interface not configured to do
> > > > > > > >
> > > > > > > > so would return an error not just timeout on connecting ...
> > > > > > > Yes this is the case, on the given interface there is the link-local
> > > > > > > address assigned:
> > > > > > >
> > > > > > > 7: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc
> > > > > > > noqueue state UP group default qlen 1000
> > > > > > >      link/ether d8:5e:d3:8f:5d:94 brd ff:ff:ff:ff:ff:ff
> > > > > > >      inet 192.168.122.220/24 brd 192.168.122.255 scope global bond0
> > > > > > >         valid_lft forever preferred_lft forever
> > > > > > >      inet6 fe80::da5e:d3ff:fe8f:5d94/64 scope link
> > > > > > >         valid_lft forever preferred_lft forever
> > > > > > Oh cool, I was concerned there was a real IPv6 address on the interface
> > > > > >
> > > > > > but then IPv6 could be used for communication.
> > > > > >
> > > > > >
> > > > > > I have always thought that the link-local address should be usable for
> > > > > >
> > > > > > local communication but I've always had trouble using them, don't know
> > > > > >
> > > > > > why.
> > > > > >
> > > > > >
> > > > > > It seems to me then that if an interface doesn't have an IPv6 address
> > > > > >
> > > > > > (excluding the link-local address in this case) then an IPv6 address
> > > > > >
> > > > > > seen via DNS should excluded from the proximity calculation (since it
> > > > > >
> > > > > > would not be reachable via that interface) and consequently excluded
> > > > > >
> > > > > > when constructing the list of addresses to be probed.
> > > > > >
> > > > > >
> > > > > > Let me see if I can set things up to test this locally.
> > > > > So I sent a patch out but forgot to add a cover letter to talk about a
> > > > >
> > > > > couple of things and didn't cc the list either ...
> > > > >
> > > > >
> > > > > Hopefully you get the patch.
> > > > >
> > > > >
> > > > > It won't apply cleanly, at the least you'll need to ignore the hunk
> > > > >
> > > > > to CHANGELOG.
> > > > >
> > > > >
> > > > > Let me know if you get the patch and if you have any problems applying
> > > > >
> > > > > it that aren't straight forward to resolve.
> > > > Thank you, the patch just arrived to me and will test it accordingly
> > > > and report back.
> > > >
> > > > Thanks for taking the time for investigating this issue!
> > > >
> > > > Should the patch be resent as well to autofs@xxxxxxxxxxxxxxx for
> > > > completeness?
> > > >
> > > > Regards,
> > > > Salvatore
> > > @Salvatore: let me know if the tests go well. If so, I can do an upload
> > > possibly before my VAC (starting next Friday).
> > >
> > > I can also do another bookworm-pu for including this. Is autofs 5.1.7
> > > (bullseye) also affected? Would that need a bullseye-pu, as well?
> > Just reported back the testing to Ian.
> >
> > It would be great, once Ian has confirmed and is going to apply
> > upstream, if you can apply the patch in Debian as well down back to
> > bullseye in fact. Let me know if you would appreciate or need help
> > with the whole.
>
> Hold back a little on applying it.
>
>
> There's a small fix in the existing patch I'd like to separate
>
> out so there will be two patches when I commit it. It was simpler
>
> to not do that initially.
>
>
> Give me a little time to recheck the changes and I'll post both
>
> patches to the list and then commit them after giving a little
>
> time for any further comments.
>
>
> Ian

I will be on VAC starting on Friday.

Salvatore, feel free to NMU (co-maintain) autofs and also do the b*-pu  
uploads once I am gone. Otherwise, it will take 3-4 weeks for me to  
get back to this.

Mike
--

mike gabriel aka sunweaver (Debian Developer)
mobile: +49 (1520) 1976 148
landline: +49 (4351) 486 14 27

GnuPG Fingerprint: 9BFB AEE8 6C0A A5FF BF22  0782 9AF4 6B30 2577 1B31
mail: sunweaver@xxxxxxxxxx, http://sunweavers.net

Attachment: pgp9BFxf2RdhR.pgp
Description: Digitale PGP-Signatur