Re: QCA ar9375 in Ubuntu 14.04 beta 2 not working

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



<drwho@xxxxxxxxxxxx> writes:

>> I just sent patches to add ar6004 hw3.0 support. If you can, please
>> test those and give feedback.
>
> Ok, I rebuilt the Ubuntu kernel with your 6 patches,
>
> sudo modprobe ath6kl_usb
> insert ar9375
>
> At first I was getting an error about not being able find the firmware
> file, so I renamed your fw-5.bin to fw.ram.bin.

You should not rename the firmware file, it will break everything if you
do that. This is what you should see:

[  364.432845] usb 2-1.4: new high-speed USB device number 4 using ehci-pci
[  364.510168] usb 2-1.4: New USB device found, idVendor=0cf3, idProduct=9375
[  364.510232] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  364.510289] usb 2-1.4: Product: USBWLAN
[  364.510346] usb 2-1.4: Manufacturer: Qualcomm Atheros.
[  364.510430] usb 2-1.4: SerialNumber: 12345678
[  364.835598] ath6kl: ar6004 hw 3.0 usb fw 3.5.0.349-1 api 5
[  364.835710] ath6kl: firmware supports: 64bit-rates,map-lp-endpoint,ratetable-mcs15,no-ip-checksum

My first guess is that something went wrong in the kernel compilation
and the new patches are not actually applied. Double check that you
really have the new hw3.0 support in place, for example by adding few
printks and making sure that you see them in dmesg.

-- 
Kalle Valo

_______________________________________________
ath6kl mailing list
ath6kl@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/ath6kl




[Index of Archives]     [Linux Kernel]     [Linux Wireless]     [Linux Bluetooth]     [Linux WPAN]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]

  Powered by Linux