Dear Rob, Thanks for your reply. What version of dmraid are you using to sucessfully recognize your Promise FastTrak TX2200 using RAID0. Thanks Date: Wed, 18 May 2005 13:58:35 +0100 From: Rob Hall <robslists@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> Subject: Re: how to set-up Promise FastTrak TX2200 To: ataraid-list@xxxxxxxxxx, hillel@xxxxxxxxxxxxxxxxxx Message-ID: <200505181358.35416.robslists@xxxxxxxxxxxxxxxxxxxxxxxxxxxx> Content-Type: text/plain; charset="iso-8859-1" On Monday 16 May 2005 17:30, Hillel Bilman wrote: > I've got a Centos4 Linux server and installed Linux on a separate drive as > it won't see my > 2 x 80GB harddrives connected via a Promise FastTrak TX2200 using > mirroring. > > I thought I would need to recompile my kernel but there is no driver in > kernel 2.6.9-5.0.5 for the TX2200. I checked and the dmraid rpm 1.0.0-rc5f > is installed and the hardware is installed but > if I type: dmraid -ay > I get "No Software RAID disks" > If I type: dmraid -ay -f pdc > I get "No RAID disk with format: pdc" > > Would anyone be so kind as to send me a HOWTO to get Linux to pick up the > RAID device. > > Any help greatly appreciated. I use a TX2000 and found that dmraid 1.0.0-rc5f would not correctly identify my RAID0 set. Might be worth trying a later dmraid revision from http://people.redhat.com/~heinzm/sw/dmraid/ as a starting point. -- Best regards, Rob Hall - Red Hat Certified Engineer Technical Team Leader Newsquest Digital Media _______________________________________________ Ataraid-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/ataraid-list
