On Tue, Dec 07, 2004 at 02:36:30PM +0100, Tarjei Knapstad wrote:
> Hi
>
> I recently installed Fedora Core 3 on a separate PATA IDE disk
> together with the Grub bootloader. I've got several windows paritions
> (including windows boot) on a SATA RAID0 array.
>
> After installing dmraid and the NTFS tools I was able to map and mount
> these partitions in FC3, but one question remains: How can I boot
> windows from on my stripe through Grub on the new PATA disk?
Presumably you can access your Windows boot disk as /dev/hdb,
your grub menu.lst file should contain something like:
title Windows
root (hd1,0)
chainloader +1
and your grub device.map:
(hd1) /dev/hdb
>
> As it is now I'm forced to press F8 at boot to get a boot menu from my
> ASUS P4P800 and then select either the array or the PATA disk with
> grub on it, but it would be nice to avoid that. I read in the archives
> about installing Grub to a ICH5R array, but I don't feel entirely
> comfortable with that, and it should be just as easy going the other
> way around... or?
>
> Thanks for any help!
>
> --
> Tarjei
>
> _______________________________________________
>
> Ataraid-list@xxxxxxxxxx
> https://www.redhat.com/mailman/listinfo/ataraid-list
--
Regards,
Heinz -- The LVM Guy --
*** Software bugs are stupid.
Nevertheless it needs not so stupid people to solve them ***
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Heinz Mauelshagen Red Hat GmbH
Consulting Development Engineer Am Sonnenhang 11
56242 Marienrachdorf
Germany
Mauelshagen@xxxxxxxxxx +49 2626 141200
FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
