Is mirroring supported on HighPoint 374's? I've defined two arrays for use in a multiboot system, one RAID0 and one RAID1. The 4 disks are attached as master drives on each channel of a HPT374. The HPT374 is integrated into an Epox 4PCA3+ mobo. Only the striped array is found by the ATARAID driver. I'm using a vanilla kernel 2.4.23-pre9. I've read all the docs I could find. The HOWTO mentions that only striping is supported. But that document is 30 months old.. Any help appreciated! Regards, --david Full /proc/partitions output below. hde + hdi is RAID0, hdg + hdk is RAID1. major minor #blocks name rio rmerge rsect ruse wio wmerge wsect wuse running use aveq 114 0 156355456 ataraid/d0 0 0 0 0 0 0 0 0 0 0 0 114 1 20972857 ataraid/d0p1 0 0 0 0 0 0 0 0 0 0 0 114 2 1 ataraid/d0p2 0 0 0 0 0 0 0 0 0 0 0 114 5 1052226 ataraid/d0p5 0 0 0 0 0 0 0 0 0 0 0 114 6 20972826 ataraid/d0p6 0 0 0 0 0 0 0 0 0 0 0 114 7 113346576 ataraid/d0p7 0 0 0 0 0 0 0 0 0 0 0 57 0 78177792 hdk 14 71 176 30 0 0 0 0 -4 92470 42591222 57 1 52428096 hdk1 12 68 160 20 0 0 0 0 0 20 20 56 0 78177792 hdi 4046 6316 72842 18370 1217 1686 21054 4160 -4 92240 42613762 34 0 78150744 hdg 14 71 176 80 0 0 0 0 -3 92440 42683852 34 1 52428096 hdg1 12 68 160 60 0 0 0 0 0 60 60 33 0 78177792 hde 3787 6211 69747 21270 779 1657 17282 2420 -4 92170 42615032 3 0 120060864 hda 10 51 128 50 0 0 0 0 -4 92510 42591422 3 1 120053713 hda1 8 48 112 40 0 0 0 0 0 40 40 Easier to read: hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63 hde: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=155114/16/63 hdg: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63 hdi: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=155114/16/63 hdk: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=155114/16/63
