*This message was transferred with a trial version of CommuniGate(tm) Pro* Hello, A few days ago I asked for your help getting a Promise PDC20376 and SATA Raid system up and running. I've given up on that attempt after following everyone's advice with no luck. I took the motherboard and the SATA drives back to the store and bought a Dell PowerEdge instead! However, I do have a nice Seagate Barracude ATA V 120GByte drive left over. And I wouldn't mind getting another one for the new system. But, I don't want to run into Linux 9 configuration problems again so I'm wondering if those in the know could recommend an ATA RAID controller that fits the following bill: - PCI64 interface - supports 2 x 120GB ATA V Seagate Barracude drives (ST3120023A) - has *real* RAID (hardware not software) 0,1,0+1 and hopefully 5 - has working drivers for Red Hat 9 (2.4.20-18.9) - source code is fine - doesn't cost an arm and a leg Thanks in advance for any recommendations you provide. -- Reid Spencer <reid@xxxxxxxxxxxxxxx>
