Well, first off, you're using the Promise binary driver, so you're on the wrong list. Second off, was that a typo or did you mean /dev/sca? If so, you might want to try /dev/sda. On Tue, 2003-03-04 at 12:37, Stuart O'Reilly wrote: > Hello all, > I've just installed a Promise SX4000 IDE Raid Card > into my computer and have had zero luck with getting > it to work. My config is as follows. 2.5Ghz 1G ram, > 120G system drive using on board ide, raid card with > 2x200g drives configured as raid 1 and 256 meg cache > ram, sony DVD burner. I have RedHat Linux 7.2 > installed, I have my drives configured correctly with > the cards bios, I have the RedHat 7.2 driver installed > correctly (as far as I can tell) and I'm using GRUB as > my bootloader. > If i do an lsmod, FastTrak and scsi_mod appear. If I > try to do an "fdisk /dev/sca" or a "fdisk > /dev/ataraid/d0p0" I get an error saying "unable to > open.......". Does anyone have any suggestions as to > what I am doing wrong? > Thanks in advance > Stuart > > http://mobile.yahoo.com.au - Yahoo! Mobile > - Exchange IMs with Messenger friends on your Telstra or Vodafone mobile phone. > > > > _______________________________________________ > > Ataraid-list@xxxxxxxxxx > https://listman.redhat.com/mailman/listinfo/ataraid-list >
