Hi
Looks like you have problems recognizing hde and hdg. You have to solve
them first before thinking of ataraid using them. May be you have bad hde
? Or, PCI IRQ sharing problem ?
Murty
On Thu, 9 May 2002, Vincent Wu wrote:
> If this helps, this is the error message I got when
> reboot after fdisk.
>
> Both hde and d0 are gone now?
>
> $ fdisk /dev/hde
>
> Unable to read /dev/hde
>
> $ fdisk /dev/ataraid/d0
>
> Unable to open /dev/ataraid/d0
>
> ======================
>
> hub.c: 2 ports detected
> usb-uhci.c: v1.275:USB Universal Host Controller
> Interface driver
> hde: dma_intr: status=0x51 { DriveReady SeekComplete
> Error }
> hde: dma_intr: error=0x10 { SectorIdNotFound },
> LBAsect=156328503, sector=156328
> 440
> hde: dma_intr: status=0x51 { DriveReady SeekComplete
> Error }
> hde: dma_intr: error=0x10 { SectorIdNotFound },
> LBAsect=156328503, sector=156328
> 440
> hde: dma_intr: status=0x51 { DriveReady SeekComplete
> Error }
> hde: dma_intr: error=0x10 { SectorIdNotFound },
> LBAsect=156328503, sector=156328
> 440
> hde: dma_intr: status=0x51 { DriveReady SeekComplete
> Error }
> hde: dma_intr: error=0x10 { SectorIdNotFound },
> LBAsect=156328503, sector=156328
> 440
> hde: DMA disabled
> PDC202XX: Primary channel reset.
> ide2: reset: master: error (0x00?)
> hde: read_intr: status=0x59 { DriveReady SeekComplete
> DataRequest Error }
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Shopping - Mother's Day is May 12th!
> http://shopping.yahoo.com
>
>
>
> _______________________________________________
>
> Ataraid-list@xxxxxxxxxx
> https://listman.redhat.com/mailman/listinfo/ataraid-list
>
