Oliver
To get the ataraid-module you must turn on the
Prompt for development and/or incomplete code/drivers
under
Code maturity level options, the first thing in the list of
options in make menuconfig
I hope that helps
Cheers
Michal Kozlowski
email: michal@xxxxxxxxxxxxxxxx
On Thu, 25 Apr 2002, Oliver Pitzeier wrote:
> Helge-Johannes Lenz wrote:
> > You can find it at the end of "ATA/IDE/MFM/RLL support"
>
> I can find this at the end of this section... No Ataraid.
> Just the Promise stuff...
>
> [*] PROMISE PDC202{46|62|65|67|68} support
> [*] Special UDMA Feature
> [*] Special FastTrak Feature
> [ ] ServerWorks OSB4/CSB5 chipsets support
> [ ] SiS5513 chipset support
> [ ] SLC90E66 chipset support
> [ ] Tekram TRM290 chipset support (EXPERIMENTAL)
> [ ] VIA82CXXX chipset support
> [ ] Other IDE chipset support
> [ ] IGNORE word93 Validation BITS
>
>
> > Make sure you enable both the controller itself and the ataraid.
>
> Yes. I found the controller, but not the ataraid-module.
>
> Thanks!
>
> -Oliver
>
>
>
>
> _______________________________________________
>
> Ataraid-list@xxxxxxxxxx
> https://listman.redhat.com/mailman/listinfo/ataraid-list
>
